Fit-onlySupply & fitReplacementsTrade fitting
Fitting teams across England, Wales, Scotland & NI · Call 0800 088 6248
RooflightInstallers.co.uk
County Armagh · Northern Ireland

Sun tunnel installation in County Armagh

A good share of sun tunnel installation in County Armagh is replacement work. Older units go brittle or discoloured, sealed glass mists, and seals give up after years of sun and frost. Swapping the unit is often possible on the existing kerb, provided that kerb is sound, level and tall enough above the finished roof. Where it is not, we rebuild it. We cover the whole of County Armagh, across 8 postcode districts, with fitters travelling to each address.

Guide prices in County Armagh

Short rigid tube

£595 – £845including VAT at 20%

Around 250 mm tube, short straight run through a loft

Wider or longer run

£845 – £1,145including VAT at 20%

Around 350 mm tube or longer runs with bends

Flat roof or complex

£1,145 – £1,745including VAT at 20%

Flat roof kits, long runs or two tubes

Guide ranges for supply & fit. Your price is fixed in a written quote after we have seen photos or surveyed. Scaffold, access towers or a crane are priced separately if the job needs them, and building control fees, where a job needs them, are shown as their own line.

Towns we list in County Armagh

We work right across Northern Ireland, and County Armagh is covered on the same footing as everywhere else. There is no showroom or depot to visit. The survey happens at your property or, for fit-only jobs, from your photos. If your address is remote or reached by ferry, tell us early and we will confirm what arrangement is needed before quoting.

What we do on the day

  • Ceiling opening cut neatly and the diffuser fitted
  • Dust cleared from the room below and the loft
  • Route through the loft checked for joists, cables and pipes
  • Flat or pitched roof kit — We confirm the roof type and covering before ordering the kit.
  • Rigid or flexible tube — We check whether a rigid tube will fit the route before falling back on a flexible one.

Rules that apply in Northern Ireland

Northern Ireland has its own rules. Permitted development for rooflights on a house requires the unit to sit below the highest part of the roof, project no more than 15 cm where the slope faces a road, and stay at least half a metre from the ridge, eaves, party wall and verge. It doesn't apply in conservation areas or within the grounds of a listed building. For building control, structural roof alterations need an application, and rooflights must meet WER Band C or 1.6 W/m²K.

Common questions in County Armagh

Do you make good inside after fitting?

Yes, where the quote includes it. Internal finishing usually means lining the reveal with plasterboard, taping or skimming, and fitting trim where it meets the ceiling. Some people prefer their own plasterer or decorator to finish off, which is fine. The written quote spells out exactly where our work stops, so nobody is left guessing about who does what once the unit is in.

What is included in the price?

The written quote lists it line by line. Typically that covers fitting labour, fixings, sealants, membrane or flashing materials, any upstand work, internal finishing if agreed, and taking away the waste. For supply and fit, the unit itself is included too. Scaffold, lifting gear and any third-party fees, where needed, are shown separately so you can see what each part of the job costs.

Do I need planning permission for a rooflight in County Armagh?

Often not. Many rooflights fall under permitted development, provided they do not project beyond the national limit and meet the other conditions that apply in Northern Ireland. Conservation areas, listed buildings and some flats are different and may need consent. Because the rules depend on the property, we confirm what is likely to apply at your address and point you to the planning authority where an application is needed.

Rear extension at dusk with lit rooflights and a roof lantern
Ready when you are

Fitting in County Armagh

Send photos and rough sizes, or ask for a survey visit for install work. You get one fixed written price before anything starts.

CallGet a quote