Fit-onlySupply & fitReplacementsTrade fitting
Fitting teams across England, Wales, Scotland & NI · Call 0800 088 6248
RooflightInstallers.co.uk
Somerset · England

Flat rooflight installation in Somerset

Flat rooflight installation across Somerset follows one method wherever the roof is. First a survey or, for fit-only work, your photos and measurements. Then a written quote with the scope and price fixed. Then a fitting day planned around the weather. We list 11 towns in Somerset on this site, each with its own page, but villages and addresses between them are covered in exactly the same way. Fitters travel to the property, so there is no need to be near any particular town.

Guide prices in Somerset

Small fixed

£995 – £1,495including VAT at 20%

Double-glazed fixed unit up to 1000 × 1000 mm, fitted to a ready upstand

Medium fixed

£1,495 – £2,295including VAT at 20%

1000 × 1500 to 1000 × 2000 mm, double or triple glazed

Large fixed

£2,295 – £4,095including VAT at 20%

Bigger units, solar-control glass, two-person lift or lifting gear

Guide ranges for supply & fit. Your price is fixed in a written quote after we have seen photos or surveyed. Scaffold, access towers or a crane are priced separately if the job needs them, and building control fees, where a job needs them, are shown as their own line.

Towns we list in Somerset

From the larger towns to the smaller places in between, we take on rooflight fitting across Somerset. The process is the same for a terrace, a farmhouse extension or an industrial unit: details first, written quote second, fitting day third. Remote and island addresses in England, where they arise, are covered by arrangement, and we tell you that before quoting.

Included in the work

  • Upstand checked or built to the maker's internal and external sizes
  • Unit bedded on the specified sealant or tape and screw-fixed
  • Membrane, felt or GRP finished to the frame the way the maker shows
  • Pitch of the glass — We make sure the glass will sit at the pitch its maker asks for.
  • Weight of large panes — We check the weight of the unit against how we will get it onto the roof.

Rules that apply in England

In England, a new rooflight opening generally needs building regulations approval because the roof structure is altered and the glazing must meet energy rules: 2.2 W/m²K for a rooflight in an existing home, or 1.4 W/m²K (or WER Band B) for a roof window. Planning is often not needed on a house: permitted development covers rooflights that stand no more than 0.15 m proud of the roof slope and sit below the highest part of the roof. Flats, listed buildings and areas with an Article 4 direction are different, so we check your address first.

Common questions in Somerset

How does payment work?

Payment terms are set out on your written quote before you accept it. Depending on the job, that may mean a deposit, stage payments for larger work, or payment on completion. The contract is with S&K Property Investments and Improvement Ltd, part of the S&K Group. Nothing is added without your agreement: if something unexpected comes up, we discuss it and agree any change before carrying on.

How long does fitting take?

Fitting a flat rooflight into an existing, correctly sized opening is often a day's work. New openings take longer, because joists or rafters need trimming, an upstand or flashing has to be built or fitted, and the inside needs finishing. Large units that need lifting gear, and days lost to rain, can stretch things further. Your written quote gives a realistic estimate for your roof.

Do you need scaffolding to fit a rooflight?

Not always. Single-storey roofs can often be reached safely with ladders, a tower or edge protection. Higher roofs, steep pitches and large units usually need scaffold or a mobile platform, and heavy glass may need a crane. We assess access from your photos or at the survey, and any scaffold or lifting cost is shown as its own line on the written quote.

Rear extension at dusk with lit rooflights and a roof lantern
Ready when you are

Fitting in Somerset

Send photos and rough sizes, or ask for a survey visit for install work. You get one fixed written price before anything starts.

CallGet a quote