Towns we list in Somerset
If you are a builder or roofer with sites across Somerset, one company can handle the rooflight element on each. The same goes for landlords and property managers with several addresses in England. Send the postcodes together and we will quote them as a group or one by one, whichever is easier for you.
Fitting services in Somerset
- Fit-only rooflight installation
- Rooflight replacement
- New rooflight in an existing roof
- Rooflight upstands & kerbs
- Rooflight glass replacement
- Rooflight leak repairs
- Flat rooflight installation
- Frameless rooflight installation
- Electric opening rooflight installation
- Walk-on rooflight installation
- Sliding rooflight installation
- Roof access hatch installation
- Roof lantern installation
- Pitched roof window installation
- Loft conversion roof windows
- Conservation rooflight installation
- Sun tunnel installation
- Commercial rooflight installation
- Dome rooflight replacement
- Smoke vent rooflight installation
- Trade rooflight fitting
Planning and building regulations in England
Replacing a rooflight in an English home is a controlled fitting: it has to be self-certified by a scheme-registered installer or notified to building control. We are not registered with a competent person scheme, so replacements we fit are notified with a building notice, and the new unit has to meet current energy limits. Adding a new one usually means a building regulations application, because joists or rafters are trimmed. On the planning side, most house rooflights are permitted development if they project 0.15 m or less; on a side slope the glass must be obscured and fixed unless the opening part is over 1.7 m above the floor.
Questions about rooflight fitting in Somerset
Do you make good inside after fitting?
Yes, where the quote includes it. Internal finishing usually means lining the reveal with plasterboard, taping or skimming, and fitting trim where it meets the ceiling. Some people prefer their own plasterer or decorator to finish off, which is fine. The written quote spells out exactly where our work stops, so nobody is left guessing about who does what once the unit is in.
How long does fitting take?
Fitting a rooflight into an existing, correctly sized opening is often a day's work. New openings take longer, because joists or rafters need trimming, an upstand or flashing has to be built or fitted, and the inside needs finishing. Large units that need lifting gear, and days lost to rain, can stretch things further. Your written quote gives a realistic estimate for your roof.
Does a rooflight need building regulations approval?
A new opening usually needs building regulations approval. A replacement is a controlled fitting: it must be self-certified by an installer registered with a competent person scheme or notified to building control. We are not registered with a scheme, so replacements we fit are notified to building control with a building notice, and the council's fee is shown on your quote.
Can you remove and dispose of the old rooflight?
Yes. Taking out the old unit is part of any replacement job, and it leaves with the rest of the waste unless you ask to keep it. Old domes, glass and frames go through proper waste routes. If removal turns up a rotten kerb or damaged decking, we show you what we have found and agree the repair with you before going any further.
