Fit-onlySupply & fitReplacementsTrade fitting
Fitting teams across England, Wales, Scotland & NI · Call 0800 088 6248
RooflightInstallers.co.uk
Gwent · NP20, NP19, NP10, NP18

Rooflight installers in Newport

Builders, roofers and extension companies in and around Newport can bring us in at a single stage: the roof is decked or battened, and the rooflight needs fitting and detailing. We do that work, and we do the same for homeowners directly. Across Gwent it ranges from fit-only installs and old-unit replacements to cutting new openings, setting lanterns on flat roofs and fitting windows into pitched ones. You get one written quote, one company responsible for the fitting, and a contract with S&K Property Investments and Improvement Ltd.

Fitting jobs in Newport

Fitting & replacement

Flat roof rooflights

Pitched roofs & lofts

Commercial & trade

The details a specialist gets right

The joint between the rooflight and the roof covering is where most leaks start. On a flat roof that means turning the membrane up the kerb and terminating it properly under the frame. On a pitched roof it means the right flashing kit, lapped correctly with the tiles or slates. These details are fiddly and easy to rush on a busy build. Giving them to someone focused on fitting the rooflight, rather than treating it as one task among dozens, cuts the chance of a callback.

Fitting in Newport and beyond

Covering Newport properly means covering the whole of it, house or business unit, across NP20, NP19 and NP10. Beyond the town, we take on jobs in Risca (5 miles) and Cwmbran (5 miles) as standard. Each one gets the same survey or photo-based pricing, the same written quote, and the same fitting standard.

Planning and building control

In Wales, a new rooflight opening generally needs building regulations approval, and a replacement needs either a scheme-registered installer's certificate or a building notice to the council. We are not registered with a scheme, so we use a building notice and show the fee on the quote. Rooflights must meet 2.2 W/m²K and roof windows 1.4 W/m²K. Planning is tighter than in England: rooflights are not permitted development in conservation areas, National Parks, Areas of Outstanding Natural Beauty or World Heritage Sites, so we check your address before quoting.

Questions about rooflight fitting in Newport

Do you make good inside after fitting?

Yes, where the quote includes it. Internal finishing usually means lining the reveal with plasterboard, taping or skimming, and fitting trim where it meets the ceiling. Some people prefer their own plasterer or decorator to finish off, which is fine. The written quote spells out exactly where our work stops, so nobody is left guessing about who does what once the unit is in.

Do you need scaffolding to fit a rooflight?

Not always. Single-storey roofs can often be reached safely with ladders, a tower or edge protection. Higher roofs, steep pitches and large units usually need scaffold or a mobile platform, and heavy glass may need a crane. We assess access from your photos or at the survey, and any scaffold or lifting cost is shown as its own line on the written quote.

Do you cover Newport?

Yes. Fitters travel to addresses in Newport and the surrounding districts, including NP20. We do not run an office there; the survey and the fitting happen at your property. A few island and remote postcodes are covered by arrangement; if yours is one, we confirm travel and dates before quoting.

Can you remove and dispose of the old rooflight?

Yes. Taking out the old unit is part of any replacement job, and it leaves with the rest of the waste unless you ask to keep it. Old domes, glass and frames go through proper waste routes. If removal turns up a rotten kerb or damaged decking, we show you what we have found and agree the repair with you before going any further.

Rear extension at dusk with lit rooflights and a roof lantern
Ready when you are

Rooflight fitting in Newport

Send your postcode, photos and what needs fitting. One fixed written price before anything starts.

CallGet a quote