Towns we list in County Durham
If you are a builder or roofer with sites across County Durham, one company can handle the rooflight element on each. The same goes for landlords and property managers with several addresses in England. Send the postcodes together and we will quote them as a group or one by one, whichever is easier for you.
- Billingham
- Bishop Auckland
- Chester-le-Street
- Consett
- Darlington
- Durham
- Hartlepool
- Newton Aycliffe
- Peterlee
- Seaham
- Spennymoor
- Stanley
- Stockton-on-Tees
- Thornaby-on-Tees
- Yarm
Fitting services in County Durham
- Fit-only rooflight installation
- Rooflight replacement
- New rooflight in an existing roof
- Rooflight upstands & kerbs
- Rooflight glass replacement
- Rooflight leak repairs
- Flat rooflight installation
- Frameless rooflight installation
- Electric opening rooflight installation
- Walk-on rooflight installation
- Sliding rooflight installation
- Roof access hatch installation
- Roof lantern installation
- Pitched roof window installation
- Loft conversion roof windows
- Conservation rooflight installation
- Sun tunnel installation
- Commercial rooflight installation
- Dome rooflight replacement
- Smoke vent rooflight installation
- Trade rooflight fitting
Planning and building regulations in England
England's rules in short: permitted development usually covers a rooflight on a house roof provided it doesn't stick out more than 0.15 m or rise above the ridge, though a listed building always needs consent and some streets have Article 4 directions. Building regulations apply to new openings, and replacements go through building control; as we are not registered with a competent person scheme, we use a building notice and show the fee on the quote. The energy limit for rooflights in existing homes is 2.2 W/m²K, and the 2026 Approved Document L, in force from 24 March 2027, keeps that figure.
Questions about rooflight fitting in County Durham
Can you fit a rooflight in winter or when it is raining?
Yes, within limits. Cold is less of a problem than wet, because membranes, primers and sealants need a dry surface to bond. We plan fitting days around the forecast and may move a date if heavy rain is due. If the roof has to be opened up, it is not left overnight without a temporary weather seal, so the room below stays dry while the work is finished.
Do you make good inside after fitting?
Yes, where the quote includes it. Internal finishing usually means lining the reveal with plasterboard, taping or skimming, and fitting trim where it meets the ceiling. Some people prefer their own plasterer or decorator to finish off, which is fine. The written quote spells out exactly where our work stops, so nobody is left guessing about who does what once the unit is in.
What if my roof opening is the wrong size for the rooflight?
We find out before the fitting day, not on it. If the opening is slightly out, it can usually be adjusted by trimming or by packing out the upstand. If it is a long way off, the choice is between altering the opening and changing the unit. Bear in mind that rooflights are often sold by builder's opening size rather than external size, so check which one your measurement refers to.
Can you replace an old dome without redoing the whole roof?
Usually, yes. If the existing kerb is sound, level and tall enough, a new unit can often sit on it with a fresh seal to the roof covering. If the kerb is rotten or too low, we rebuild it and patch the covering around it rather than stripping the whole roof. This is checked at the survey and included in the written quote, so you know the full scope first.
