Fit-onlySupply & fitReplacementsTrade fitting
Fitting teams across England, Wales, Scotland & NI · Call 0800 088 6248
RooflightInstallers.co.uk
Dumfries & Galloway · Scotland

Smoke vent rooflight installation in Dumfries & Galloway

No two smoke vent rooflights in Dumfries & Galloway cost exactly the same to fit, and a guide price only gets you so far. What moves it: the size and weight of the unit, whether a new opening is needed, the roof covering, scaffold or lifting needs, and how much internal finishing you want. We quote smoke vent rooflight installation across Dumfries & Galloway with each of those spelt out. Send photos for a first figure, or arrange a survey where the job calls for one.

Guide prices in Dumfries & Galloway

Vent swap

£3,595 – £6,595including VAT at 20%

Like-for-like certified vent and actuator, connected to the existing controls and commissioned by a smoke-control specialist

Vent with new controls

£5,745 – £9,595including VAT at 20%

Vent plus new control panel and detection, commissioned by a smoke-control specialist

Multiple vents

£9,595 – £17,995including VAT at 20%

Several stairwells or larger systems, priced from a survey

Guide ranges for supply & fit; controls and commissioning by a smoke-control specialist. Your price is fixed in a written quote after we have seen photos or surveyed. Scaffold, access towers or a crane are priced separately if the job needs them, and building warrant fees, where a job needs them, are shown as their own line.

Towns we list in Dumfries & Galloway

Builders and roofers working in Dumfries & Galloway can use us for the rooflight element of a job, wherever the site is in Scotland. Homeowners can book us directly. In both cases the fitters come to the address, the work follows the maker's instructions, and a written quote fixes the price first. Fitting is carried out by vetted teams under S&K's direction.

What the job includes

  • Old vent removed with the stairwell kept protected below
  • New vent fitted, sealed and weathered into the roof
  • Upstand checked, adapted or rebuilt to the vent maker's drawing
  • Certified as a system — We only fit smoke vents that are certified to BS EN 12101-2.
  • Fire rules near escape routes — We check the roof around the vent for fire rules that affect it.

Rules that apply in Scotland

In Scotland, smoke ventilation is covered by the domestic or non-domestic Technical Handbook, depending on the building. Vents must be certified products, keep the required free area, and be connected and commissioned by a smoke-control specialist. A building warrant is needed where the system is altered.

Common questions in Dumfries & Galloway

How long does fitting take?

Fitting a smoke vent rooflight into an existing, correctly sized opening is often a day's work. New openings take longer, because joists or rafters need trimming, an upstand or flashing has to be built or fitted, and the inside needs finishing. Large units that need lifting gear, and days lost to rain, can stretch things further. Your written quote gives a realistic estimate for your roof.

Can you fit a rooflight in winter or when it is raining?

Yes, within limits. Cold is less of a problem than wet, because membranes, primers and sealants need a dry surface to bond. We plan fitting days around the forecast and may move a date if heavy rain is due. If the roof has to be opened up, it is not left overnight without a temporary weather seal, so the room below stays dry while the work is finished.

What upstand height and roof pitch does smoke vent rooflight fitting need?

It depends on the product. Manufacturers usually specify a minimum upstand height above the finished roof surface, and a minimum pitch on the glass so rain runs off. We follow the maker's figures for your unit rather than a rule of thumb. If your existing kerb or roof falls short, we explain the options, such as raising the upstand or choosing a unit with built-in pitch.

Rear extension at dusk with lit rooflights and a roof lantern
Ready when you are

Fitting in Dumfries & Galloway

Send photos and rough sizes, or ask for a survey visit for install work. You get one fixed written price before anything starts.

CallGet a quote