Sliding rooflight installation in Earl Shilton

What the job costs in Earl Shilton

Guide ranges for supply & fit. Your price is fixed in a written quote after we have seen photos or surveyed. Scaffold, access towers or a crane are priced separately if the job needs them, and building control fees, where a job needs them, are shown as their own line.

Fitting across Earl Shilton and nearby

Looking at a property near Earl Shilton but not quite in it? We work across LE9, LE10 and LE19 and outwards to Hinckley, Glen Parva and Braunstone. Give us the full postcode when you get in touch, because access, parking and the route for a large unit all depend on the exact street. Those details shape the quote for any job around Earl Shilton.

What we check on a supplied unit

There are two ways to do this. Supply and fit means we source a sliding rooflight that suits your roof and install it, so one company answers for both the product choice and the fitting. Fit-only means you buy the unit and we install it. With fit-only, the product warranty stays with the maker or seller, and our written guarantee covers the fitting work. Both routes get the same checks on the opening, the upstand and the maker's instructions before anything is fixed.

What we do on the day

• Clear run confirmed for the glass to slide over when open
• Frame fixed and weathered with the membrane dressed up the kerb
• Full open and close cycle checked before handover
• Weight and lifting — We plan the lift for a sliding rooflight before it is ordered.
• What the glass slides over — We check the area the glass will cover when open before deciding where the unit goes.

Fitting your sliding rooflight, step by step

Morning first: the team arrives, introduces itself and walks through the job with you. Dust sheets go down in the room below and along the route in. Then the opening and upstand, or the flashing on a pitched roof, are checked against the unit's measurements. A sliding rooflight goes in, is fixed to the maker's pattern and sealed into the roof covering. Inside, the reveal is finished as quoted. Before leaving, the team clears debris and talks you through what was done. Most jobs of this type take one to two days.

Do you need permission in Earl Shilton?

Replacing a rooflight in an English home is a controlled fitting: it has to be self-certified by a scheme-registered installer or notified to building control. We are not registered with a competent person scheme, so replacements we fit are notified with a building notice, and the new unit has to meet current energy limits. Adding a new one usually means a building regulations application, because joists or rafters are trimmed. On the planning side, most house rooflights are permitted development if they project 0.15 m or less; on a side slope the glass must be obscured and fixed unless the opening part is over 1.7 m above the floor.

Getting a price from photos

Keep it simple. Two or three photos, outside and inside. Approximate sizes. What the roof is made of. Anything awkward about getting up there, such as a conservatory below, a narrow side path or no parking. If you bought the rooflight online, the link or model name. Then your postcode in or around LE9. That is enough for a first price.

Common questions in Earl Shilton

Questions before you commit? Send them over with your Earl Shilton postcode and we will answer them plainly, with a quote alongside.