Roof lantern installation in Manchester

Manchester guide prices

Guide ranges for supply & fit. Your price is fixed in a written quote after we have seen photos or surveyed. Scaffold, access towers or a crane are priced separately if the job needs them, and building control fees, where a job needs them, are shown as their own line.

Coverage in and around Manchester

Jobs across M2, M1 and M4 are part of our normal cover for Manchester. We are not an office on the high street. Our fitting teams come out to the property from wherever they are working that week. Neighbouring places such as Longsight and Salford are covered on the same terms, so a house on the edge of town is no harder to book than one in the centre.

What we check on a supplied unit

Your unit or ours, the fitting standard is the same. For supply and fit we choose a roof lantern to suit the roof and price it with the installation. For fit-only we work with what you have, after confirming it arrived undamaged, that it matches the builder's opening, and that the upstand will sit at the height the maker asks for. Report any transit damage to the seller, as the product cover is theirs and the maker's. Our written guarantee applies to the fitting itself.

What we do on the day

• Roof membrane checked where it meets the lantern frame
• Caps, end closures and ridge trims fitted and sealed
• Frame assembled on the kerb in the maker's set order
• Heat and glare — We talk through the glass options before you order a large lantern.
• Following the build order — We assemble lanterns in exactly the sequence the instructions give.

Fitting your roof lantern, step by step

Morning first: the team arrives, introduces itself and walks through the job with you. Dust sheets go down in the room below and along the route in. Then the opening and upstand, or the flashing on a pitched roof, are checked against the unit's measurements. A roof lantern goes in, is fixed to the maker's pattern and sealed into the roof covering. Inside, the reveal is finished as quoted. Before leaving, the team clears debris and talks you through what was done. Most jobs of this type take one to two days.

Regulations for Manchester properties

Replacing a rooflight in an English home is a controlled fitting: it has to be self-certified by a scheme-registered installer or notified to building control. We are not registered with a competent person scheme, so replacements we fit are notified with a building notice, and the new unit has to meet current energy limits. Adding a new one usually means a building regulations application, because joists or rafters are trimmed. On the planning side, most house rooflights are permitted development if they project 0.15 m or less; on a side slope the glass must be obscured and fixed unless the opening part is over 1.7 m above the floor.

Getting a price from photos

Start with your phone. Take a picture of the roof where the unit goes or already sits, then one from inside looking up. Measure what you can, even roughly. Tell us what the roof is covered with and how a fitter would reach it: ladder, garden access or scaffold. Bought it already? Send the link or spec. Add your full postcode, for example in M2, and we can price it.

Common questions in Manchester

Got a unit waiting to go in, or need one sourced? Either way, start with your Manchester address and a couple of photos.