Flat rooflight installation across Gwynedd & Anglesey

Flat rooflight installation in Gwynedd & Anglesey

Across Gwynedd & Anglesey we fit flat rooflights for homeowners, builders, roofers and commercial clients. The trade side matters: an extension company with jobs running in the three towns we list does not want to coordinate a different fitter for each. We can take the rooflight element of every site, fitted to the maker's instructions and left ready for the next trade. Domestic customers get the same fitting standard, quoted in writing before work begins.

Guide prices in Gwynedd & Anglesey

Small fixed

£995 – £1,495including VAT at 20%

Double-glazed fixed unit up to 1000 × 1000 mm, fitted to a ready upstand

Medium fixed

£1,495 – £2,295including VAT at 20%

1000 × 1500 to 1000 × 2000 mm, double or triple glazed

Large fixed

£2,295 – £4,095including VAT at 20%

Bigger units, solar-control glass, two-person lift or lifting gear

Guide ranges for supply & fit. Your price is fixed in a written quote after we have seen photos or surveyed. Scaffold, access towers or a crane are priced separately if the job needs them, and building control fees, where a job needs them, are shown as their own line.

Towns we list in Gwynedd & Anglesey

We work right across Wales, and Gwynedd & Anglesey is covered on the same footing as everywhere else. There is no showroom or depot to visit. The survey happens at your property or, for fit-only jobs, from your photos. If your address is remote or reached by ferry, tell us early and we will confirm what arrangement is needed before quoting.

Included in the work

Membrane, felt or GRP finished to the frame the way the maker shows
Lifting gear or extra hands arranged for large and heavy panes
Unit bedded on the specified sealant or tape and screw-fixed
Fixed or opening — We ask whether you need ventilation before you settle on a fixed unit.
Weight of large panes — We check the weight of the unit against how we will get it onto the roof.

Rules that apply in Wales

Wales sets energy limits of 2.2 W/m²K for rooflights and 1.4 W/m²K for roof windows, and new rooflight openings generally need building regulations approval. Replacement units are controlled fittings; we are not registered with a competent person scheme, so ours are covered by a building notice to the council. Planning permission is needed for rooflights in conservation areas, National Parks, AONBs and World Heritage Sites. We check which applies and include the fee in your quote.

Common questions in Gwynedd & Anglesey

Does a rooflight need building regulations approval?

In Wales a new opening generally needs building regulations approval. A replacement must be self-certified by a scheme-registered installer or covered by a building notice. We are not registered with a scheme, so replacements we fit go through a building notice, and the council's fee is shown on your quote.

Can you remove and dispose of the old rooflight?

Yes. Taking out the old unit is part of any replacement job, and it leaves with the rest of the waste unless you ask to keep it. Old domes, glass and frames go through proper waste routes. If removal turns up a rotten kerb or damaged decking, we show you what we have found and agree the repair with you before going any further.

How does payment work?

Payment terms are set out on your written quote before you accept it. Depending on the job, that may mean a deposit, stage payments for larger work, or payment on completion. The contract is with S&K Property Investments and Improvement Ltd, part of the S&K Group. Nothing is added without your agreement: if something unexpected comes up, we discuss it and agree any change before carrying on.