Dome rooflight replacement in Battersea

Guide prices

Guide ranges for supply & fit, per dome; building control notice fee extra on homes in England and Wales. Your price is fixed in a written quote after we have seen photos or surveyed. Scaffold, access towers or a crane are priced separately if the job needs them, and building control fees, where a job needs them, are shown as their own line.

Where our fitters travel

Jobs across SW11, SW8 and SW3 are part of our normal cover for Battersea. We are not an office on the high street. Our fitting teams come out to the property from wherever they are working that week. Neighbouring places such as Chelsea and Clapham are covered on the same terms, so a house on the edge of town is no harder to book than one in the centre.

Your dome rooflights or ours

If you have bought a dome rooflight yourself, we check four things before fitting. First, the delivery: open it, look for chips, cracks and bent frames, and report any damage to the seller straight away. Second, the size, measured against the builder's opening rather than the external frame. Third, the upstand height above the finished roof. Fourth, the maker's instructions, which set the fixings and sealing. Product warranty claims go to the seller and maker; our guarantee is for how it was fitted.

On the day, we cover

• Kerb top cleaned of old sealant, fixings and loose felt
• Old dome unscrewed, lifted off and taken away
• Kerb checked for rot, size and height before the new unit goes on
• Upgrading to glass — We check whether the kerb suits a glass unit before recommending one.
• Multi-skin domes and energy — We fit multi-skin domes rather than single-skin ones as replacements.

A typical installation day

On the day, you need to be in at the start and at the end. In between, the fitters get on with it. They will want the room below cleared where possible, a parking spot if you have one, and somewhere to set the unit down safely. After checking the opening and the upstand or flashing, they fix a dome rooflight, seal it and finish the inside. Packaging and any old unit leave with them unless the quote says otherwise.

Do you need permission in Battersea?

Replacing a rooflight in an English home is a controlled fitting: it has to be self-certified by a scheme-registered installer or notified to building control. We are not registered with a competent person scheme, so replacements we fit are notified with a building notice, and the new unit has to meet current energy limits. Adding a new one usually means a building regulations application, because joists or rafters are trimmed. On the planning side, most house rooflights are permitted development if they project 0.15 m or less; on a side slope the glass must be obscured and fixed unless the opening part is over 1.7 m above the floor.

Getting a price from photos

Start with your phone. Take a picture of the roof where the unit goes or already sits, then one from inside looking up. Measure what you can, even roughly. Tell us what the roof is covered with and how a fitter would reach it: ladder, garden access or scaffold. Bought it already? Send the link or spec. Add your full postcode, for example in SW11, and we can price it.

Common questions in Battersea

Tell us your postcode, SW11 or close by, and what you want fitted. We will reply with the next steps and a quote.