Conservation rooflight installation in Barnstaple

What the job costs in Barnstaple

Guide ranges for supply & fit. Your price is fixed in a written quote after we have seen photos or surveyed. Scaffold, access towers or a crane are priced separately if the job needs them, and building control fees, where a job needs them, are shown as their own line.

Coverage in and around Barnstaple

Jobs across EX31, EX32 and EX33 are part of our normal cover for Barnstaple. We are not an office on the high street. Our fitting teams come out to the property from wherever they are working that week. Neighbouring places such as Bideford and Tiverton are covered on the same terms, so a house on the edge of town is no harder to book than one in the centre.

Your conservation rooflights or ours

Your unit or ours, the fitting standard is the same. For supply and fit we choose a conservation rooflight to suit the roof and price it with the installation. For fit-only we work with what you have, after confirming it arrived undamaged, that it matches the builder's opening, and that the upstand will sit at the height the maker asks for. Report any transit damage to the seller, as the product cover is theirs and the maker's. Our written guarantee applies to the fitting itself.

What the job includes

• Position checked against any consent drawings or council conditions
• Rooflight set low so it sits close to the line of the roof
• Inside lining fitted to suit the room's ceiling or exposed rafters
• Reusing the original covering — We plan to reuse the existing slates or tiles wherever we can.
• Glazing bar and frame detail — We check whether the council has asked for particular details, such as a central glazing bar or a dark frame colour.

A typical installation day

Arrive and agree the plan. Sheet the floor and furniture. Set up the ladder, tower or scaffold. Check the opening, the upstand or flashing, and the unit against the paperwork. Fix and pack a conservation rooflight level. Seal it into the roof. Line the reveal or fit the ceiling trim. Clean the glass, clear the waste, and talk you through it. That is the shape of most fitting days, and for this type of job it usually takes one day.

Do you need permission in Barnstaple?

In England, a new rooflight opening generally needs building regulations approval because the roof structure is altered and the glazing must meet energy rules: 2.2 W/m²K for a rooflight in an existing home, or 1.4 W/m²K (or WER Band B) for a roof window. Planning is often not needed on a house: permitted development covers rooflights that stand no more than 0.15 m proud of the roof slope and sit below the highest part of the roof. Flats, listed buildings and areas with an Article 4 direction are different, so we check your address first.

Getting a price from photos

Start with your phone. Take a picture of the roof where the unit goes or already sits, then one from inside looking up. Measure what you can, even roughly. Tell us what the roof is covered with and how a fitter would reach it: ladder, garden access or scaffold. Bought it already? Send the link or spec. Add your full postcode, for example in EX31, and we can price it.

Common questions in Barnstaple

Planning a conservation rooflight in Barnstaple? Tell us about the roof and we will come back with a clear price in writing.