Commercial rooflight installation across Powys

Commercial rooflight installation in Powys

Commercial rooflight installation across Powys follows one method wherever the roof is. First a survey or, for fit-only work, your photos and measurements. Then a written quote with the scope and price fixed. Then a fitting day planned around the weather. We list 4 towns in Powys on this site, each with its own page, but villages and addresses between them are covered in exactly the same way. Fitters travel to the property, so there is no need to be near any particular town.

Guide prices in Powys

Per standard unit

£1,095 – £1,895including VAT at 20%

Flat glass or polycarbonate unit on an existing kerb, as part of a multi-unit job

Per large unit

£1,895 – £3,345including VAT at 20%

Larger or ventilating units, edge protection in place

Programme of works

£3,345 – £7,195including VAT at 20%

Phased replacement across a building, priced from a survey

Guide ranges for supply & fit, per unit; site set-up priced separately. Your price is fixed in a written quote after we have seen photos or surveyed. Scaffold, access towers or a crane are priced separately if the job needs them, and building control fees, where a job needs them, are shown as their own line.

Towns we list in Powys

From the larger towns to the smaller places in between, we take on rooflight fitting across Powys. The process is the same for a terrace, a farmhouse extension or an industrial unit: details first, written quote second, fitting day third. Remote and island addresses in Wales, where they arise, are covered by arrangement, and we tell you that before quoting.

What's included

New units fitted, sealed and weathered into the roof covering
Roof survey of every unit, kerb and the fragile areas around them
Unit schedule and handover notes for the building's records
Fire performance near boundaries — We check how close the rooflights are to the site boundary and to escape routes.
Working around occupied buildings — We plan noise, dust and access around the people using the building.

Rules that apply in Wales

Non-domestic rooflight work in Wales follows the Welsh Approved Documents: energy limits for the glazing, fire checks near boundaries and over escape routes, and building control for new openings. Planning depends on the building and its location. We set out the route on your quote.

Common questions in Powys

Can you fit a rooflight in winter or when it is raining?

Yes, within limits. Cold is less of a problem than wet, because membranes, primers and sealants need a dry surface to bond. We plan fitting days around the forecast and may move a date if heavy rain is due. If the roof has to be opened up, it is not left overnight without a temporary weather seal, so the room below stays dry while the work is finished.

Do commercial rooflights need planning permission?

Like-for-like replacements on commercial buildings rarely need planning permission. New or larger rooflights on non-domestic buildings and blocks of flats usually need checking with the planning authority, because householder permitted development rights don't apply. We tell you what we know about your building and point you to the right team.

How long does fitting take?

Fitting a commercial rooflight into an existing, correctly sized opening is often a day's work. New openings take longer, because joists or rafters need trimming, an upstand or flashing has to be built or fitted, and the inside needs finishing. Large units that need lifting gear, and days lost to rain, can stretch things further. Your written quote gives a realistic estimate for your roof.