Fit-onlySupply & fitReplacementsTrade fitting
Fitting teams across England, Wales, Scotland & NI · Call 0800 088 6248
RooflightInstallers.co.uk
Peterhead · AB42 · Aberdeen & Aberdeenshire

Commercial rooflight installation in Peterhead

Builders and extension firms in Peterhead often want the rooflight stage of a project handled by a specialist fitting team. We step in once the roof deck or battens are ready, fit a commercial rooflight on your upstand or ours, detail it into the membrane or tiles, and leave the opening ready for the plasterer. Homeowners get exactly the same service directly. In each case the job is quoted in writing first, with any access or lifting needs spelt out. Jobs around AB42 and the neighbouring districts are welcome.

Guide price from £1,095 · Supply & fit, per unit; site set-up priced separately

Guide prices in Peterhead

Per standard unit

£1,095 – £1,895including VAT at 20%

Flat glass or polycarbonate unit on an existing kerb, as part of a multi-unit job

Per large unit

£1,895 – £3,345including VAT at 20%

Larger or ventilating units, edge protection in place

Programme of works

£3,345 – £7,195including VAT at 20%

Phased replacement across a building, priced from a survey

Guide ranges for supply & fit, per unit; site set-up priced separately. Your price is fixed in a written quote after we have seen photos or surveyed. Scaffold, access towers or a crane are priced separately if the job needs them, and building warrant fees, where a job needs them, are shown as their own line.

Fitting across Peterhead and nearby

Distance is rarely the deciding factor. A roof in Aberdeen, 28 miles from Peterhead, gets the same survey, the same written quote and the same fitting process as one in AB42, AB43 and AB41. What changes the price is the job itself: size of unit, roof type, access and lifting. Elgin, around 58 miles out, is treated the same way.

What the job includes

  • New units fitted, sealed and weathered into the roof covering
  • Access, edge protection and fragile-roof covers planned before work starts
  • Roof survey of every unit, kerb and the fragile areas around them
  • Fragile roofs and rooflights — We treat every rooflight and the roof around it as fragile until we have checked it.
  • Fire performance near boundaries — We check how close the rooflights are to the site boundary and to escape routes.

From arrival to clean-up

Protection comes before tools. Floors, furniture and stairs get covered, and the ceiling below the opening is sheeted to catch dust. Up top, the fitters confirm the opening is square and the upstand or flashing suits what the maker specifies. Fixing follows, then weather-sealing into the membrane, felt or tiles. Only once the roof is tight do they turn to the internal reveal. Time on site for a commercial rooflight: about a day per unit, longer on big roofs, weather permitting.

Regulations for Peterhead properties

On non-domestic buildings and blocks of flats in Scotland, new rooflights and roof alterations need a building warrant, and the Technical Handbooks set energy and fire requirements for the glazing. Smoke vents must be certified products with controls commissioned by a specialist. We confirm the warrant route for your building.

Help us quote accurately

What we cannot see, we have to guess, and guesses make quotes wider. So the more you send, the tighter the price. Useful: shots from the roof or garden, shots from the room underneath, a rough width and length, the roof finish, any access problems, and the product page if you have already ordered. Add the property postcode around AB42 and we will come back with a quote or a survey date.

Common questions in Peterhead

What upstand height and roof pitch does commercial rooflight fitting need?

It depends on the product. Manufacturers usually specify a minimum upstand height above the finished roof surface, and a minimum pitch on the glass so rain runs off. We follow the maker's figures for your unit rather than a rule of thumb. If your existing kerb or roof falls short, we explain the options, such as raising the upstand or choosing a unit with built-in pitch.

What if my roof opening is the wrong size for the commercial rooflight?

We find out before the fitting day, not on it. If the opening is slightly out, it can usually be adjusted by trimming or by packing out the upstand. If it is a long way off, the choice is between altering the opening and changing the unit. Bear in mind that rooflights are often sold by builder's opening size rather than external size, so check which one your measurement refers to.

Will my new commercial rooflight leak?

A correctly fitted unit should not. Leaks usually trace back to the detail around the frame: an upstand that is too low, a membrane or flashing that is not dressed properly, sealant applied to a damp surface, or water ponding against the kerb. We fit to the maker's instructions and check each of those points. The fitting carries a written workmanship guarantee, with its terms set out on your quote.

Send a few photos and your AB42 postcode, and we will put together a written quote for the job.

Rear extension at dusk with lit rooflights and a roof lantern
Ready when you are

Commercial rooflights in Peterhead

Send photos and rough sizes, or ask for a survey for install work. One fixed written price before anything starts.

CallGet a quote