Roof lantern installation in Prescot

What the job costs in Prescot

Guide ranges for supply & fit. Your price is fixed in a written quote after we have seen photos or surveyed. Scaffold, access towers or a crane are priced separately if the job needs them, and building control fees, where a job needs them, are shown as their own line.

Fitting across Prescot and nearby

Distance is rarely the deciding factor. A roof in Huyton, 2 miles from Prescot, gets the same survey, the same written quote and the same fitting process as one in L34, L35 and L36. What changes the price is the job itself: size of unit, roof type, access and lifting. St Helens, around 3 miles out, is treated the same way.

What we check on a supplied unit

There are two ways to do this. Supply and fit means we source a roof lantern that suits your roof and install it, so one company answers for both the product choice and the fitting. Fit-only means you buy the unit and we install it. With fit-only, the product warranty stays with the maker or seller, and our written guarantee covers the fitting work. Both routes get the same checks on the opening, the upstand and the maker's instructions before anything is fixed.

Included in the work

• Caps, end closures and ridge trims fitted and sealed
• Roof membrane checked where it meets the lantern frame
• Internal trims fitted to the ring beam or upstand
• Heat and glare — We talk through the glass options before you order a large lantern.
• Following the build order — We assemble lanterns in exactly the sequence the instructions give.

How a fitting day runs

Morning first: the team arrives, introduces itself and walks through the job with you. Dust sheets go down in the room below and along the route in. Then the opening and upstand, or the flashing on a pitched roof, are checked against the unit's measurements. A roof lantern goes in, is fixed to the maker's pattern and sealed into the roof covering. Inside, the reveal is finished as quoted. Before leaving, the team clears debris and talks you through what was done. Most jobs of this type take one to two days.

Planning and building rules in England

Replacing a rooflight in an English home is a controlled fitting: it has to be self-certified by a scheme-registered installer or notified to building control. We are not registered with a competent person scheme, so replacements we fit are notified with a building notice, and the new unit has to meet current energy limits. Adding a new one usually means a building regulations application, because joists or rafters are trimmed. On the planning side, most house rooflights are permitted development if they project 0.15 m or less; on a side slope the glass must be obscured and fixed unless the opening part is over 1.7 m above the floor.

Help us quote accurately

Keep it simple. Two or three photos, outside and inside. Approximate sizes. What the roof is made of. Anything awkward about getting up there, such as a conservatory below, a narrow side path or no parking. If you bought the rooflight online, the link or model name. Then your postcode in or around L34. That is enough for a first price.

Common questions in Prescot

Tell us your postcode, L34 or close by, and what you want fitted. We will reply with the next steps and a quote.