Roof access hatch installation in Rawtenstall

Rawtenstall guide prices

Guide ranges for supply & fit. Your price is fixed in a written quote after we have seen photos or surveyed. Scaffold, access towers or a crane are priced separately if the job needs them, and building control fees, where a job needs them, are shown as their own line.

Is your address covered?

Distance is rarely the deciding factor. A roof in Haslingden, 2 miles from Rawtenstall, gets the same survey, the same written quote and the same fitting process as one in BB4, OL13 and BB5. What changes the price is the job itself: size of unit, roof type, access and lifting. Ramsbottom, around 4 miles out, is treated the same way.

Already bought your unit?

Which works out better, buying your own or letting us supply? It depends on what you value. Buying your own gives you control of the product and what you pay for it. Letting us supply puts the whole job, unit and fitting, under one written quote. On a customer-supplied unit we still measure it against the opening, look at the upstand, and inspect the condition it arrived in. Warranty on the product sits with whoever sold it, while the fitting carries our own guarantee.

On the day, we cover

• Opening and closing tested and the controls explained
• Electric hatches wired ready for the electrician's final connection, quoted separately
• Kerb checked or built square, level and to the maker's height
• Safety at the roof edge — We ask how often people will use the roof and for what.
• Energy performance of hatches — We check the hatch's published U-value against the limit that applies.

Fitting your roof access hatch, step by step

Fitting days start with a look at the sky. If rain is due, the order of work changes so the roof is never left open to it. A typical day for a roof access hatch runs like this: set up access, protect the room, open up the roof or prepare the existing kerb or frame, check sizes, fix, seal, then finish inside. On jobs that take more than a day, the opening is weather-sealed overnight. The last hour goes on tidying, waste removal and a walk-round with you.

Do you need permission in Rawtenstall?

England's rules in short: permitted development usually covers a rooflight on a house roof provided it doesn't stick out more than 0.15 m or rise above the ridge, though a listed building always needs consent and some streets have Article 4 directions. Building regulations apply to new openings, and replacements go through building control; as we are not registered with a competent person scheme, we use a building notice and show the fee on the quote. The energy limit for rooflights in existing homes is 2.2 W/m²K, and the 2026 Approved Document L, in force from 24 March 2027, keeps that figure.

What to send for a quick quote

A fast quote needs five things: a photo of the roof from outside, one from the room below, rough sizes of the opening or the space, the roof covering (felt, single-ply, fibreglass, tiles, slate or metal), and a note on access. If you have already bought the unit, add the product link or spec sheet. And give us the postcode, BB4 or a neighbouring district.

Common questions in Rawtenstall

Get in touch with the details of your Rawtenstall property and we will explain what the job involves and what it costs.