Fit-onlySupply & fitReplacementsTrade fitting
Fitting teams across England, Wales, Scotland & NI · Call 0800 088 6248
RooflightInstallers.co.uk
Sunbury-on-Thames · TW16 · Surrey

Loft conversion roof windows in Sunbury-on-Thames

Builders and extension firms in Sunbury-on-Thames often want the rooflight stage of a project handled by a specialist fitting team. We step in once the roof deck or battens are ready, fit a loft roof window on your upstand or ours, detail it into the membrane or tiles, and leave the opening ready for the plasterer. Homeowners get exactly the same service directly. In each case the job is quoted in writing first, with any access or lifting needs spelt out. Jobs around TW16 and the neighbouring districts are welcome.

Guide price from £1,795 · Supply & fit

What the job costs in Sunbury-on-Thames

Pair of windows

£1,795 – £2,745including VAT at 20%

Two roof windows into a loft room, flashings and linings

Three or four windows

£2,745 – £4,545including VAT at 20%

Bigger loft rooms or stairwells

Balcony or combination

£4,545 – £7,195including VAT at 20%

Balcony-style or stacked window combinations

Guide ranges for supply & fit. Your price is fixed in a written quote after we have seen photos or surveyed. Scaffold, access towers or a crane are priced separately if the job needs them, and building control fees, where a job needs them, are shown as their own line.

Fitting across Sunbury-on-Thames and nearby

Jobs across TW16, TW17 and KT12 are part of our normal cover for Sunbury-on-Thames. We are not an office on the high street. Our fitting teams come out to the property from wherever they are working that week. Neighbouring places such as Walton-on-Thames and West Molesey are covered on the same terms, so a house on the edge of town is no harder to book than one in the centre.

Buying your own, or letting us supply

There are two ways to do this. Supply and fit means we source a loft roof window that suits your roof and install it, so one company answers for both the product choice and the fitting. Fit-only means you buy the unit and we install it. With fit-only, the product warranty stays with the maker or seller, and our written guarantee covers the fitting work. Both routes get the same checks on the opening, the upstand and the maker's instructions before anything is fixed.

On the day, we cover

  • Tiles or slates cut and refitted, with the roof left weathertight
  • Linings fitted, ready for the plasterboarder or decorator
  • Insulation collars fitted so the room's insulation meets each frame
  • Approved loft drawings — We work to the window positions on your approved loft drawings or agree changes with your builder first.
  • Balcony-style windows — We check the rafters and the roof pitch before recommending balcony-style windows.

How a fitting day runs

Morning first: the team arrives, introduces itself and walks through the job with you. Dust sheets go down in the room below and along the route in. Then the opening and upstand, or the flashing on a pitched roof, are checked against the unit's measurements. A loft roof window goes in, is fixed to the maker's pattern and sealed into the roof covering. Inside, the reveal is finished as quoted. Before leaving, the team clears debris and talks you through what was done. Most jobs of this type take one to two days.

Planning and building rules in England

In England, a new rooflight opening generally needs building regulations approval because the roof structure is altered and the glazing must meet energy rules: 2.2 W/m²K for a rooflight in an existing home, or 1.4 W/m²K (or WER Band B) for a roof window. Planning is often not needed on a house: permitted development covers rooflights that stand no more than 0.15 m proud of the roof slope and sit below the highest part of the roof. Flats, listed buildings and areas with an Article 4 direction are different, so we check your address first.

What to send for a quick quote

What we cannot see, we have to guess, and guesses make quotes wider. So the more you send, the tighter the price. Useful: shots from the roof or garden, shots from the room underneath, a rough width and length, the roof finish, any access problems, and the product page if you have already ordered. Add the property postcode around TW16 and we will come back with a quote or a survey date.

Common questions in Sunbury-on-Thames

Do you cover Sunbury-on-Thames?

Yes. Fitters travel to addresses in Sunbury-on-Thames and the surrounding districts, including TW16. We do not run an office there; the survey and the fitting happen at your property. A few island and remote postcodes are covered by arrangement; if yours is one, we confirm travel and dates before quoting.

Do you need scaffolding to fit a rooflight?

Not always. Single-storey roofs can often be reached safely with ladders, a tower or edge protection. Higher roofs, steep pitches and large units usually need scaffold or a mobile platform, and heavy glass may need a crane. We assess access from your photos or at the survey, and any scaffold or lifting cost is shown as its own line on the written quote.

Can you fit the loft roof window I bought online?

Yes, fit-only is one of our core services. Send the product link or spec, photos of the roof and rough sizes, and we can usually price it from those. Before fitting we check the delivery for damage, which should be reported to the seller, plus the size against the opening, the flashing kit and the roof pitch. The product warranty stays with the maker or seller, and our guarantee covers the fitting.

Planning a loft roof window in Sunbury-on-Thames? Tell us about the roof and we will come back with a clear price in writing.

Rear extension at dusk with lit rooflights and a roof lantern
Ready when you are

Loft roof windows in Sunbury-on-Thames

Send photos and rough sizes, or ask for a survey for install work. One fixed written price before anything starts.

CallGet a quote