Fit-onlySupply & fitReplacementsTrade fitting
Fitting teams across England, Wales, Scotland & NI · Call 0800 088 6248
RooflightInstallers.co.uk
Ware · SG12 · Hertfordshire

Loft conversion roof windows in Ware

Loft conversion roof windows in Ware comes down to what happens around the glass. A good unit sat on a poor upstand, or with the membrane or flashing cut short at the corners, will still let water in. We fit each loft roof window to the maker's instructions for fixings, packers and sealant, for homes and businesses across Ware and the rest of Hertfordshire. That covers supply and fit, fit-only for a unit you already own, and swapping out a tired one. Every job starts with a written quote, so the price and scope are clear before anyone climbs a ladder.

Guide price from £1,795 · Supply & fit

Guide prices

Pair of windows

£1,795 – £2,745including VAT at 20%

Two roof windows into a loft room, flashings and linings

Three or four windows

£2,745 – £4,545including VAT at 20%

Bigger loft rooms or stairwells

Balcony or combination

£4,545 – £7,195including VAT at 20%

Balcony-style or stacked window combinations

Guide ranges for supply & fit. Your price is fixed in a written quote after we have seen photos or surveyed. Scaffold, access towers or a crane are priced separately if the job needs them, and building control fees, where a job needs them, are shown as their own line.

Coverage in and around Ware

Distance is rarely the deciding factor. A roof in Hertford, 2 miles from Ware, gets the same survey, the same written quote and the same fitting process as one in SG12, SG13 and SG14. What changes the price is the job itself: size of unit, roof type, access and lifting. Hoddesdon, around 3 miles out, is treated the same way.

Fit-only or supply and fit

Your unit or ours, the fitting standard is the same. For supply and fit we choose a loft roof window to suit the roof and price it with the installation. For fit-only we work with what you have, after confirming it arrived undamaged, that it matches the builder's opening, and that the upstand will sit at the height the maker asks for. Report any transit damage to the seller, as the product cover is theirs and the maker's. Our written guarantee applies to the fitting itself.

Included in the work

  • Linings fitted, ready for the plasterboarder or decorator
  • Tiles or slates cut and refitted, with the roof left weathertight
  • Rafters trimmed and doubled where the openings need them
  • Approved loft drawings — We work to the window positions on your approved loft drawings or agree changes with your builder first.
  • Energy performance in a loft — We check every window meets the energy limit for roof windows in existing homes.

How a fitting day runs

Protection comes before tools. Floors, furniture and stairs get covered, and the ceiling below the opening is sheeted to catch dust. Up top, the fitters confirm the opening is square and the upstand or flashing suits what the maker specifies. Fixing follows, then weather-sealing into the membrane, felt or tiles. Only once the roof is tight do they turn to the internal reveal. Time on site for a loft roof window: one to two days, weather permitting.

Do you need permission in Ware?

England's rules in short: permitted development usually covers a rooflight on a house roof provided it doesn't stick out more than 0.15 m or rise above the ridge, though a listed building always needs consent and some streets have Article 4 directions. Building regulations apply to new openings, and replacements go through building control; as we are not registered with a competent person scheme, we use a building notice and show the fee on the quote. The energy limit for rooflights in existing homes is 2.2 W/m²K, and the 2026 Approved Document L, in force from 24 March 2027, keeps that figure.

Details that speed up your quote

For fit-only work, the product details matter most: the link, the spec sheet, or a photo of the label on the box. Alongside that, send pictures of the roof and the ceiling below, approximate opening sizes, the type of roof covering, and how someone would get onto the roof. For supply and fit, the same photos and sizes do the job. Finish with your postcode, such as SG12.

Common questions in Ware

Does a rooflight need building regulations approval?

A new opening usually needs building regulations approval. A replacement is a controlled fitting: it must be self-certified by an installer registered with a competent person scheme or notified to building control. We are not registered with a scheme, so replacements we fit are notified to building control with a building notice, and the council's fee is shown on your quote.

Will my new loft roof window leak?

A correctly fitted unit should not. Leaks usually trace back to the detail around the frame: an upstand that is too low, a membrane or flashing that is not dressed properly, sealant applied to a damp surface, or water ponding against the kerb. We fit to the maker's instructions and check each of those points. The fitting carries a written workmanship guarantee, with its terms set out on your quote.

How does payment work?

Payment terms are set out on your written quote before you accept it. Depending on the job, that may mean a deposit, stage payments for larger work, or payment on completion. The contract is with S&K Property Investments and Improvement Ltd, part of the S&K Group. Nothing is added without your agreement: if something unexpected comes up, we discuss it and agree any change before carrying on.

Send a few photos and your SG12 postcode, and we will put together a written quote for the job.

Rear extension at dusk with lit rooflights and a roof lantern
Ready when you are

Loft roof windows in Ware

Send photos and rough sizes, or ask for a survey for install work. One fixed written price before anything starts.

CallGet a quote