Fit-onlySupply & fitReplacementsTrade fitting
Fitting teams across England, Wales, Scotland & NI · Call 0800 088 6248
RooflightInstallers.co.uk
Letchworth Garden City · SG6 · Hertfordshire

Loft conversion roof windows in Letchworth Garden City

A rooflight is not finished when the roof is watertight. The inside matters too: the reveal or lining around the opening, the plaster, the trim where it meets the ceiling. Some installers leave that for somebody else. When we quote for loft conversion roof windows in Letchworth Garden City, internal finishing is listed so you can see whether it is included or left for your decorator. That way a loft roof window looks right from the room below as well as from outside. We cover Letchworth Garden City and properties throughout Hertfordshire.

Guide price from £1,795 · Supply & fit

Guide prices in Letchworth Garden City

Pair of windows

£1,795 – £2,745including VAT at 20%

Two roof windows into a loft room, flashings and linings

Three or four windows

£2,745 – £4,545including VAT at 20%

Bigger loft rooms or stairwells

Balcony or combination

£4,545 – £7,195including VAT at 20%

Balcony-style or stacked window combinations

Guide ranges for supply & fit. Your price is fixed in a written quote after we have seen photos or surveyed. Scaffold, access towers or a crane are priced separately if the job needs them, and building control fees, where a job needs them, are shown as their own line.

Covering SG6 and neighbouring districts

Fitters travel to the job, so the address is what counts. In Letchworth Garden City that means postcode districts SG6, SG5 and SG7, and the same teams can just as easily take on work in Hitchin, about 3 miles away, or Stevenage at roughly 5 miles. Survey and fitting dates are offered according to fitter availability, and travel is built into the quote rather than added later.

Fit-only or supply and fit

A damaged delivery is a frequent snag on fit-only work. Before the day, unpack a loft roof window, photograph it, and tell the seller about any cracks or scuffs, because claims are much easier made early. We will also ask for the model or a link, so we can read the maker's instructions and check the opening size and the flashing kit it expects. If everything lines up, we fit it. If not, we explain what needs changing first.

On the day, we cover

  • Window positions set out on the slope to line up inside and out
  • Matching or combination flashing kits for windows side by side
  • Linings fitted, ready for the plasterboarder or decorator
  • Energy performance in a loft — We check every window meets the energy limit for roof windows in existing homes.
  • Fitting stage and weather — We plan when the windows go in around the rest of the conversion.

What happens on the day

Morning first: the team arrives, introduces itself and walks through the job with you. Dust sheets go down in the room below and along the route in. Then the opening and upstand, or the flashing on a pitched roof, are checked against the unit's measurements. A loft roof window goes in, is fixed to the maker's pattern and sealed into the roof covering. Inside, the reveal is finished as quoted. Before leaving, the team clears debris and talks you through what was done. Most jobs of this type take one to two days.

Planning and building rules in England

Replacing a rooflight in an English home is a controlled fitting: it has to be self-certified by a scheme-registered installer or notified to building control. We are not registered with a competent person scheme, so replacements we fit are notified with a building notice, and the new unit has to meet current energy limits. Adding a new one usually means a building regulations application, because joists or rafters are trimmed. On the planning side, most house rooflights are permitted development if they project 0.15 m or less; on a side slope the glass must be obscured and fixed unless the opening part is over 1.7 m above the floor.

Details that speed up your quote

A fast quote needs five things: a photo of the roof from outside, one from the room below, rough sizes of the opening or the space, the roof covering (felt, single-ply, fibreglass, tiles, slate or metal), and a note on access. If you have already bought the unit, add the product link or spec sheet. And give us the postcode, SG6 or a neighbouring district.

Common questions in Letchworth Garden City

What is included in the price?

The written quote lists it line by line. Typically that covers fitting labour, fixings, sealants, membrane or flashing materials, any upstand work, internal finishing if agreed, and taking away the waste. For supply and fit, the unit itself is included too. Scaffold, lifting gear and any third-party fees, where needed, are shown separately so you can see what each part of the job costs.

Can you remove and dispose of the old rooflight?

Yes. Taking out the old unit is part of any replacement job, and it leaves with the rest of the waste unless you ask to keep it. Old domes, glass and frames go through proper waste routes. If removal turns up a rotten kerb or damaged decking, we show you what we have found and agree the repair with you before going any further.

Does a rooflight need building regulations approval?

A new opening usually needs building regulations approval. A replacement is a controlled fitting: it must be self-certified by an installer registered with a competent person scheme or notified to building control. We are not registered with a scheme, so replacements we fit are notified to building control with a building notice, and the council's fee is shown on your quote.

Questions before you commit? Send them over with your Letchworth Garden City postcode and we will answer them plainly, with a quote alongside.

Rear extension at dusk with lit rooflights and a roof lantern
Ready when you are

Loft roof windows in Letchworth Garden City

Send photos and rough sizes, or ask for a survey for install work. One fixed written price before anything starts.

CallGet a quote