Fit-onlySupply & fitReplacementsTrade fitting
Fitting teams across England, Wales, Scotland & NI · Call 0800 088 6248
RooflightInstallers.co.uk
Tyldesley · M29 · Greater Manchester

Loft conversion roof windows in Tyldesley

If the loft roof window on your roof now is misted, discoloured, cracked or letting water in, replacing it is often simpler than people expect. The old unit comes out, we inspect the kerb or frame underneath, and we decide with you whether it can be reused or needs rebuilding. Then the new one goes in, sealed to the roof covering and finished inside. We handle this kind of loft conversion roof windows in Tyldesley and nearby, alongside new openings and fit-only work. Postcode M29 and its neighbours are all within our cover.

Guide price from £1,795 · Supply & fit

Guide prices in Tyldesley

Pair of windows

£1,795 – £2,745including VAT at 20%

Two roof windows into a loft room, flashings and linings

Three or four windows

£2,745 – £4,545including VAT at 20%

Bigger loft rooms or stairwells

Balcony or combination

£4,545 – £7,195including VAT at 20%

Balcony-style or stacked window combinations

Guide ranges for supply & fit. Your price is fixed in a written quote after we have seen photos or surveyed. Scaffold, access towers or a crane are priced separately if the job needs them, and building control fees, where a job needs them, are shown as their own line.

Areas around Tyldesley we cover

Tyldesley and the districts around it, M29, M46 and M38, all sit inside our working area. So does the ground between Tyldesley and Atherton (1 mile), and on towards Leigh (2 miles). When a fitting team is booked, their travel is already in the quoted price, so it does not turn up as a surprise line on the final bill.

Already bought your unit?

Supply and fit tends to suit people who would rather not pick a unit from a catalogue. We look at the roof, the opening and how you use the room, then put a loft roof window on the quote that fits all three. Fit-only suits people who already know what they want, or have one on site. We are happy with either. The difference is who stands behind what: on fit-only, the maker or retailer covers the product, and our workmanship guarantee covers the installation.

What we do on the day

  • Linings fitted, ready for the plasterboarder or decorator
  • Matching or combination flashing kits for windows side by side
  • Insulation collars fitted so the room's insulation meets each frame
  • Combination flashings — We order combination flashings where windows sit close together.
  • Fitting stage and weather — We plan when the windows go in around the rest of the conversion.

A typical installation day

Where a job takes one to two days, the split is usually structural work first and finishing second. Early on, the fitters cut or prepare the opening, trim where needed and prepare the upstand or flashing. Then a loft roof window is lifted in, fixed and made weathertight so the roof is sound before anyone moves inside. Plasterboard, trim and filler for the reveal come after. Each evening the work area is swept, and at the end the glass is cleaned and the team talks you through what was done.

Planning, building control and Tyldesley

Replacing a rooflight in an English home is a controlled fitting: it has to be self-certified by a scheme-registered installer or notified to building control. We are not registered with a competent person scheme, so replacements we fit are notified with a building notice, and the new unit has to meet current energy limits. Adding a new one usually means a building regulations application, because joists or rafters are trimmed. On the planning side, most house rooflights are permitted development if they project 0.15 m or less; on a side slope the glass must be obscured and fixed unless the opening part is over 1.7 m above the floor.

What to send for a quick quote

Start with your phone. Take a picture of the roof where the unit goes or already sits, then one from inside looking up. Measure what you can, even roughly. Tell us what the roof is covered with and how a fitter would reach it: ladder, garden access or scaffold. Bought it already? Send the link or spec. Add your full postcode, for example in M29, and we can price it.

Common questions in Tyldesley

Do you need scaffolding to fit a rooflight?

Not always. Single-storey roofs can often be reached safely with ladders, a tower or edge protection. Higher roofs, steep pitches and large units usually need scaffold or a mobile platform, and heavy glass may need a crane. We assess access from your photos or at the survey, and any scaffold or lifting cost is shown as its own line on the written quote.

Do you cover Tyldesley?

Yes. Fitters travel to addresses in Tyldesley and the surrounding districts, including M29. We do not run an office there; the survey and the fitting happen at your property. A few island and remote postcodes are covered by arrangement; if yours is one, we confirm travel and dates before quoting.

Does a rooflight need building regulations approval?

A new opening usually needs building regulations approval. A replacement is a controlled fitting: it must be self-certified by an installer registered with a competent person scheme or notified to building control. We are not registered with a scheme, so replacements we fit are notified to building control with a building notice, and the council's fee is shown on your quote.

Get in touch with the details of your Tyldesley property and we will explain what the job involves and what it costs.

Rear extension at dusk with lit rooflights and a roof lantern
Ready when you are

Loft roof windows in Tyldesley

Send photos and rough sizes, or ask for a survey for install work. One fixed written price before anything starts.

CallGet a quote