Conservation rooflight installation in Wallington

What the job costs in Wallington

Guide ranges for supply & fit. Your price is fixed in a written quote after we have seen photos or surveyed. Scaffold, access towers or a crane are priced separately if the job needs them, and building control fees, where a job needs them, are shown as their own line.

Covering SM6 and neighbouring districts

Jobs across SM6, SM5 and SM1 are part of our normal cover for Wallington. We are not an office on the high street. Our fitting teams come out to the property from wherever they are working that week. Neighbouring places such as Carshalton and Sutton are covered on the same terms, so a house on the edge of town is no harder to book than one in the centre.

Buying your own, or letting us supply

A damaged delivery is a frequent snag on fit-only work. Before the day, unpack a conservation rooflight, photograph it, and tell the seller about any cracks or scuffs, because claims are much easier made early. We will also ask for the model or a link, so we can read the maker's instructions and check the opening size and the flashing kit it expects. If everything lines up, we fit it. If not, we explain what needs changing first.

On the day, we cover

• Rafters trimmed with timbers that suit the existing roof
• Flashings in lead or a matching kit, dressed to the covering
• Inside lining fitted to suit the room's ceiling or exposed rafters
• Energy and old roofs — We make sure the rooflight meets current energy rules while suiting an older roof build-up.
• Conservation area rules by nation — We check the permitted development position for your nation before the rooflight is ordered.

A typical installation day

Morning first: the team arrives, introduces itself and walks through the job with you. Dust sheets go down in the room below and along the route in. Then the opening and upstand, or the flashing on a pitched roof, are checked against the unit's measurements. A conservation rooflight goes in, is fixed to the maker's pattern and sealed into the roof covering. Inside, the reveal is finished as quoted. Before leaving, the team clears debris and talks you through what was done. Most jobs of this type take one day.

Planning, building control and Wallington

England's rules in short: permitted development usually covers a rooflight on a house roof provided it doesn't stick out more than 0.15 m or rise above the ridge, though a listed building always needs consent and some streets have Article 4 directions. Building regulations apply to new openings, and replacements go through building control; as we are not registered with a competent person scheme, we use a building notice and show the fee on the quote. The energy limit for rooflights in existing homes is 2.2 W/m²K, and the 2026 Approved Document L, in force from 24 March 2027, keeps that figure.

Help us quote accurately

Start with your phone. Take a picture of the roof where the unit goes or already sits, then one from inside looking up. Measure what you can, even roughly. Tell us what the roof is covered with and how a fitter would reach it: ladder, garden access or scaffold. Bought it already? Send the link or spec. Add your full postcode, for example in SM6, and we can price it.

Common questions in Wallington

Ask for a quote for your Wallington roof. Survey dates are offered based on fitter availability once you are happy with the price.