Fit-onlySupply & fitReplacementsTrade fitting
Fitting teams across England, Wales, Scotland & NI · Call 0800 088 6248
RooflightInstallers.co.uk
England · B, DY, WR postcodes

Rooflight installers in Worcestershire

Rooflight jobs vary a great deal. Flat roofs on extensions, pitched roofs over lofts, metal sheet and single-ply on commercial units: each needs a different approach to the upstand, the flashing and the seal. We fit across Worcestershire, England, matching the method to the roof rather than forcing one detail onto every job. That includes fit-only work, replacements, new openings, roof lanterns, pitched roof windows, conservation rooflights and trade subcontracting, all quoted in writing before work starts. A survey or a set of good photos tells us which approach your roof needs.

Towns we list in Worcestershire

If you are a builder or roofer with sites across Worcestershire, one company can handle the rooflight element on each. The same goes for landlords and property managers with several addresses in England. Send the postcodes together and we will quote them as a group or one by one, whichever is easier for you.

Fitting services in Worcestershire

Planning and building regulations in England

Replacing a rooflight in an English home is a controlled fitting: it has to be self-certified by a scheme-registered installer or notified to building control. We are not registered with a competent person scheme, so replacements we fit are notified with a building notice, and the new unit has to meet current energy limits. Adding a new one usually means a building regulations application, because joists or rafters are trimmed. On the planning side, most house rooflights are permitted development if they project 0.15 m or less; on a side slope the glass must be obscured and fixed unless the opening part is over 1.7 m above the floor.

Questions about rooflight fitting in Worcestershire

What is included in the price?

The written quote lists it line by line. Typically that covers fitting labour, fixings, sealants, membrane or flashing materials, any upstand work, internal finishing if agreed, and taking away the waste. For supply and fit, the unit itself is included too. Scaffold, lifting gear and any third-party fees, where needed, are shown separately so you can see what each part of the job costs.

Does a rooflight need building regulations approval?

A new opening usually needs building regulations approval. A replacement is a controlled fitting: it must be self-certified by an installer registered with a competent person scheme or notified to building control. We are not registered with a scheme, so replacements we fit are notified to building control with a building notice, and the council's fee is shown on your quote.

What upstand height and roof pitch does rooflight fitting need?

It depends on the product. Manufacturers usually specify a minimum upstand height above the finished roof surface, and a minimum pitch on the glass so rain runs off. We follow the maker's figures for your unit rather than a rule of thumb. If your existing kerb or roof falls short, we explain the options, such as raising the upstand or choosing a unit with built-in pitch.

Can you remove and dispose of the old rooflight?

Yes. Taking out the old unit is part of any replacement job, and it leaves with the rest of the waste unless you ask to keep it. Old domes, glass and frames go through proper waste routes. If removal turns up a rotten kerb or damaged decking, we show you what we have found and agree the repair with you before going any further.

Rear extension at dusk with lit rooflights and a roof lantern
Ready when you are

Rooflight fitting in Worcestershire

Send your postcode, photos and what needs fitting. You will get a fixed written price before anything starts.

CallGet a quote