Rooflight replacement in Horwich

What the job costs in Horwich

Guide ranges for supply & fit; building control notice fee extra in England and Wales. Your price is fixed in a written quote after we have seen photos or surveyed. Scaffold, access towers or a crane are priced separately if the job needs them, and building control fees, where a job needs them, are shown as their own line.

Where our fitters travel

Distance is rarely the deciding factor. A roof in Westhoughton, 4 miles from Horwich, gets the same survey, the same written quote and the same fitting process as one in BL6, BL5 and BL1. What changes the price is the job itself: size of unit, roof type, access and lifting. Chorley, around 4 miles out, is treated the same way.

What we check on a supplied unit

If you have bought a replacement rooflight yourself, we check four things before fitting. First, the delivery: open it, look for chips, cracks and bent frames, and report any damage to the seller straight away. Second, the size, measured against the builder's opening rather than the external frame. Third, the upstand height above the finished roof. Fourth, the maker's instructions, which set the fixings and sealing. Product warranty claims go to the seller and maker; our guarantee is for how it was fitted.

Included in the work

• Roof membrane repaired and turned up where it meets the kerb
• New unit bedded, fixed and sealed exactly as its maker shows
• Packers, an adaptor or a new insulated upstand where the old kerb falls short
• Inside finishes — We check the condition of the plaster and trim around the opening from inside.
• Energy rules for the new unit — We make sure the replacement meets the current energy limit, not just the old unit's performance.

How a fitting day runs

Where a job takes one day, the split is usually structural work first and finishing second. Early on, the fitters cut or prepare the opening, trim where needed and prepare the upstand or flashing. Then a replacement rooflight is lifted in, fixed and made weathertight so the roof is sound before anyone moves inside. Plasterboard, trim and filler for the reveal come after. Each evening the work area is swept, and at the end the glass is cleaned and the team talks you through what was done.

Planning, building control and Horwich

In England, a new rooflight opening generally needs building regulations approval because the roof structure is altered and the glazing must meet energy rules: 2.2 W/m²K for a rooflight in an existing home, or 1.4 W/m²K (or WER Band B) for a roof window. Planning is often not needed on a house: permitted development covers rooflights that stand no more than 0.15 m proud of the roof slope and sit below the highest part of the roof. Flats, listed buildings and areas with an Article 4 direction are different, so we check your address first.

Help us quote accurately

A fast quote needs five things: a photo of the roof from outside, one from the room below, rough sizes of the opening or the space, the roof covering (felt, single-ply, fibreglass, tiles, slate or metal), and a note on access. If you have already bought the unit, add the product link or spec sheet. And give us the postcode, BL6 or a neighbouring district.

Common questions in Horwich

Tell us your postcode, BL6 or close by, and what you want fitted. We will reply with the next steps and a quote.