Fit-onlySupply & fitReplacementsTrade fitting
Fitting teams across England, Wales, Scotland & NI · Call 0800 088 6248
RooflightInstallers.co.uk
Pinner · HA5 · Greater London

Rooflight leak repairs in Pinner

Tell us what you are seeing: drips, stains on the ceiling, misting, a draught, or a rooflight that no longer closes tight. Photos help. From that we arrange a diagnostic visit in Pinner, with its cost agreed before booking. On site we check the sealant, the flashing or membrane upturn, the condensation channels and the glass. Then you get a straight answer and, if a repair is worth doing, a written quote for the rooflight leak repairs.

Guide price from £145 · Charged visit, then repair priced before any work

Pinner guide prices

Diagnostic visit

£145 – £195including VAT at 20%

Roof and inside inspected, cause found, written repair price

Reseal and re-flash

£295 – £645including VAT at 20%

Failed sealant and flashing taken out, joints cleaned, resealed and taped

Upstand or membrane repair

£645 – £1,445including VAT at 20%

Rotten kerb section or roof membrane at the upstand repaired

Guide ranges. The first visit is charged and priced before booking; any repair is priced in writing before work starts. Scaffold, access towers or a crane are priced separately if the job needs them, and building control fees, where a job needs them, are shown as their own line.

Fitting across Pinner and nearby

Looking at a property near Pinner but not quite in it? We work across HA5, HA2 and HA6 and outwards to Wealdstone, Ruislip and Harrow. Give us the full postcode when you get in touch, because access, parking and the route for a large unit all depend on the exact street. Those details shape the quote for any job around Pinner.

What we do on the day

  • Rotten kerb sections replaced where the timber has gone soft
  • Membrane splits at the upstand cut back and patched
  • Controlled water test where it helps pin down the entry point
  • Water lying against the kerb — We check whether rainwater sits against the upstand after it stops raining.
  • Leak or condensation — We work out whether the water is coming from outside or forming inside on cold glass.

How a repair visit goes

A repair visit starts outside. The fitter looks at the roof around the unit for ponding, split membrane, loose flashing and failed sealant, then moves inside to check stains, the frame and the condensation channels. Where it helps, a controlled water test narrows down the entry point. Before leaving, they explain what they found and whether a small fix can be done within the agreed visit, or needs a separate written quote.

Planning, building control and Pinner

Replacing a rooflight in an English home is a controlled fitting: it has to be self-certified by a scheme-registered installer or notified to building control. We are not registered with a competent person scheme, so replacements we fit are notified with a building notice, and the new unit has to meet current energy limits. Adding a new one usually means a building regulations application, because joists or rafters are trimmed. On the planning side, most house rooflights are permitted development if they project 0.15 m or less; on a side slope the glass must be obscured and fixed unless the opening part is over 1.7 m above the floor.

What to send us

Photos help us price the visit. Send one of the stain or drip inside, one of the rooflight from outside if you can reach a safe viewpoint, and a note of when it leaks: in heavy rain, in wind, or all the time. Add the postcode, HA5 or similar, and how the roof is reached.

Common questions in Pinner

Can you replace just the misted glass?

Often, yes. Misting between the panes means the sealed unit has failed, but the frame around it may be perfectly sound. Where the maker's design allows the glass to be changed, we measure the unit and fit a replacement, which costs less than a whole new rooflight. Where it does not, or the frame is also worn out, we explain why replacement is the better option.

Why is my rooflight leaking?

The usual causes are sealant that has cracked or pulled away, flashing or membrane that has perished at the edges, condensation channels blocked with dirt, water ponding against the kerb, or a seal failing on the glass unit. Sometimes the water is coming in elsewhere and running along to the rooflight. A diagnostic visit finds the real source before anyone starts applying sealant.

Will resealing fix my leaking rooflight?

Sometimes. If the sealant has simply aged and the flashing, upstand and glass are sound, a careful reseal on a dry day can solve it. If the real problem is ponding water, a low upstand or a perished membrane, fresh sealant will only hide it for a while. We tell you which one you are dealing with before recommending any work, and quote the proper fix in writing.

For a repair in Pinner, start with photos and the postcode; we confirm the visit price before anything is booked.

Rear extension at dusk with lit rooflights and a roof lantern
Ready when you are

Leak repairs in Pinner

Send photos of the problem and we will tell you what a visit costs before booking.

CallGet a quote