Fit-onlySupply & fitReplacementsTrade fitting
Fitting teams across England, Wales, Scotland & NI · Call 0800 088 6248
RooflightInstallers.co.uk
Epsom · KT18 · Surrey

Pitched roof window installation in Epsom

Already bought a pitched roof window, or still deciding which one to get? Both are fine. For pitched roof window installation in Epsom we either source a suitable unit and install it, or fit the one waiting in your garage. Fit-only jobs are usually priced from your photos and measurements, while supply-and-fit and replacement jobs get a free survey first. Whichever route you take, the opening, the upstand or flashing, and the delivery are checked before anything is fixed down. Properties in KT18 and the surrounding districts are covered on the same terms.

Guide price from £845 · Supply & fit

Epsom guide prices

Standard window

£845 – £1,395including VAT at 20%

Centre-pivot roof window with flashing kit, tiles cut and refitted, inner lining

Larger or top-hung

£1,395 – £2,045including VAT at 20%

Bigger or top-hung windows, or two in the same roof

Electric or pair

£2,045 – £3,095including VAT at 20%

Electric or solar windows, or a matched pair with blinds

Guide ranges for supply & fit. Your price is fixed in a written quote after we have seen photos or surveyed. Scaffold, access towers or a crane are priced separately if the job needs them, and building control fees, where a job needs them, are shown as their own line.

Where our fitters travel

Jobs across KT18, KT17 and KT19 are part of our normal cover for Epsom. We are not an office on the high street. Our fitting teams come out to the property from wherever they are working that week. Neighbouring places such as Ewell and Chessington are covered on the same terms, so a house on the edge of town is no harder to book than one in the centre.

Buying your own, or letting us supply

If you have bought a pitched roof window yourself, we check four things before fitting. First, the delivery: open it, look for chips, cracks and bent frames, and report any damage to the seller straight away. Second, the size, measured against the builder's opening rather than the external frame. Third, the flashing kit and the roof pitch range. Fourth, the maker's instructions, which set the fixings and sealing. Product warranty claims go to the seller and maker; our guarantee is for how it was fitted.

What the job includes

  • Window frame fixed on its brackets, square and at the right height
  • Tiles or slates cut and refitted neatly around the flashing
  • Insulation collar and vapour layer fitted to stop a cold edge
  • Scaffold or not — We look at the roof height and the window position to see whether scaffolding is needed.
  • Flashing to suit the roof — We match the flashing kit to your roof covering before ordering.

A typical installation day

Fitting days start with a look at the sky. If rain is due, the order of work changes so the roof is never left open to it. A typical day for a pitched roof window runs like this: set up access, protect the room, open up the roof or prepare the existing kerb or frame, check sizes, fix, seal, then finish inside. On jobs that take more than a day, the opening is weather-sealed overnight. The last hour goes on tidying, waste removal and a walk-round with you.

Do you need permission in Epsom?

Two sets of rules matter in England. Planning: a rooflight on a house is normally permitted development if it projects no more than 0.15 m and stays below the highest part of the roof, but flats, listed buildings and Article 4 areas need checking. Building regulations: new openings need approval for the structure and energy performance, and a replacement is a controlled fitting. We are not registered with a competent person scheme, so we notify replacements to building control with a building notice and put the council's fee on the quote.

Help us quote accurately

For fit-only work, the product details matter most: the link, the spec sheet, or a photo of the label on the box. Alongside that, send pictures of the roof and the ceiling below, approximate opening sizes, the type of roof covering, and how someone would get onto the roof. For supply and fit, the same photos and sizes do the job. Finish with your postcode, such as KT18.

Common questions in Epsom

Do you offer trade rates for builders and roofers?

We carry out subcontract fitting for builders, roofers, extension companies and commercial contractors. Pricing is per job or per schedule of units, agreed in writing before we start. We can work to your programme, fit on your upstand or build our own, and leave the opening ready for the next trade. Send drawings or a unit schedule and we will come back with a trade quote.

Do you need scaffolding to fit a rooflight?

Not always. Single-storey roofs can often be reached safely with ladders, a tower or edge protection. Higher roofs, steep pitches and large units usually need scaffold or a mobile platform, and heavy glass may need a crane. We assess access from your photos or at the survey, and any scaffold or lifting cost is shown as its own line on the written quote.

Will my new pitched roof window leak?

A correctly fitted unit should not. Leaks usually trace back to the detail around the frame: an upstand that is too low, a membrane or flashing that is not dressed properly, sealant applied to a damp surface, or water ponding against the kerb. We fit to the maker's instructions and check each of those points. The fitting carries a written workmanship guarantee, with its terms set out on your quote.

Ask for a quote for your Epsom roof. Survey dates are offered based on fitter availability once you are happy with the price.

Rear extension at dusk with lit rooflights and a roof lantern
Ready when you are

Roof windows in Epsom

Send photos and rough sizes, or ask for a survey for install work. One fixed written price before anything starts.

CallGet a quote