Fit-onlySupply & fitReplacementsTrade fitting
Fitting teams across England, Wales, Scotland & NI · Call 0800 088 6248
RooflightInstallers.co.uk
Hawarden · CH5 · Clwyd

Pitched roof window installation in Hawarden

Pitched roof window installation in Hawarden comes down to what happens around the glass. A good unit sat on a poor upstand, or with the membrane or flashing cut short at the corners, will still let water in. We fit each pitched roof window to the maker's instructions for fixings, packers and sealant, for homes and businesses across Hawarden and the rest of Clwyd. That covers supply and fit, fit-only for a unit you already own, and swapping out a tired one. Every job starts with a written quote, so the price and scope are clear before anyone climbs a ladder.

Guide price from £845 · Supply & fit

Guide prices in Hawarden

Standard window

£845 – £1,395including VAT at 20%

Centre-pivot roof window with flashing kit, tiles cut and refitted, inner lining

Larger or top-hung

£1,395 – £2,045including VAT at 20%

Bigger or top-hung windows, or two in the same roof

Electric or pair

£2,045 – £3,095including VAT at 20%

Electric or solar windows, or a matched pair with blinds

Guide ranges for supply & fit. Your price is fixed in a written quote after we have seen photos or surveyed. Scaffold, access towers or a crane are priced separately if the job needs them, and building control fees, where a job needs them, are shown as their own line.

Coverage in and around Hawarden

Distance is rarely the deciding factor. A roof in Deeside, 1 mile from Hawarden, gets the same survey, the same written quote and the same fitting process as one in CH5, CH4 and CH7. What changes the price is the job itself: size of unit, roof type, access and lifting. Buckley, around 3 miles out, is treated the same way.

Buying your own, or letting us supply

Your unit or ours, the fitting standard is the same. For supply and fit we choose a pitched roof window to suit the roof and price it with the installation. For fit-only we work with what you have, after confirming it arrived undamaged, that it matches the builder's opening, and that the upstand will sit at the height the maker asks for. Report any transit damage to the seller, as the product cover is theirs and the maker's. Our written guarantee applies to the fitting itself.

On the day, we cover

  • Rafters trimmed where the window is wider than the gap between them
  • Flashing kit matched to tiles, slates or a recessed fit
  • Tiles or slates cut and refitted neatly around the flashing
  • Energy limit for roof windows — We check the window's published figures against the energy limit for existing homes.
  • Head height and view — We think about how the window will be used from inside before fixing its height.

Fitting your pitched roof window, step by step

Arrive and agree the plan. Sheet the floor and furniture. Set up the ladder, tower or scaffold. Check the opening, the upstand or flashing, and the unit against the paperwork. Fix and pack a pitched roof window level. Seal it into the roof. Line the reveal or fit the ceiling trim. Clean the glass, clear the waste, and talk you through it. That is the shape of most fitting days, and for this type of job it usually takes one day.

Planning, building control and Hawarden

Welsh rules differ from England's in one important way: rooflights lose permitted development rights in conservation areas, National Parks, AONBs and World Heritage Sites. Elsewhere on a house, a rooflight that projects no more than 150 mm and stays below the highest part of the roof is usually fine. Building regulations still apply to new openings, replacements we fit go through a building notice because we are not scheme-registered, and the energy limit for rooflights is 2.2 W/m²K. A new Welsh Approved Document L takes effect on 4 March 2027.

Getting a price from photos

Start with your phone. Take a picture of the roof where the unit goes or already sits, then one from inside looking up. Measure what you can, even roughly. Tell us what the roof is covered with and how a fitter would reach it: ladder, garden access or scaffold. Bought it already? Send the link or spec. Add your full postcode, for example in CH5, and we can price it.

Common questions in Hawarden

Do you need scaffolding to fit a rooflight?

Not always. Single-storey roofs can often be reached safely with ladders, a tower or edge protection. Higher roofs, steep pitches and large units usually need scaffold or a mobile platform, and heavy glass may need a crane. We assess access from your photos or at the survey, and any scaffold or lifting cost is shown as its own line on the written quote.

What is included in the price?

The written quote lists it line by line. Typically that covers fitting labour, fixings, sealants, membrane or flashing materials, any upstand work, internal finishing if agreed, and taking away the waste. For supply and fit, the unit itself is included too. Scaffold, lifting gear and any third-party fees, where needed, are shown separately so you can see what each part of the job costs.

Does a rooflight need building regulations approval?

In Wales a new opening generally needs building regulations approval. A replacement must be self-certified by a scheme-registered installer or covered by a building notice. We are not registered with a scheme, so replacements we fit go through a building notice, and the council's fee is shown on your quote.

Ask for a quote for your Hawarden roof. Survey dates are offered based on fitter availability once you are happy with the price.

Rear extension at dusk with lit rooflights and a roof lantern
Ready when you are

Roof windows in Hawarden

Send photos and rough sizes, or ask for a survey for install work. One fixed written price before anything starts.

CallGet a quote