New rooflight in an existing roof in Dinnington

What the job costs in Dinnington

Guide ranges for supply & fit, including structure and making good; building control or warrant fees extra. Your price is fixed in a written quote after we have seen photos or surveyed. Scaffold, access towers or a crane are priced separately if the job needs them, and building control fees, where a job needs them, are shown as their own line.

Is your address covered?

Distance is rarely the deciding factor. A roof in Maltby, 3 miles from Dinnington, gets the same survey, the same written quote and the same fitting process as one in S25, S26 and S66. What changes the price is the job itself: size of unit, roof type, access and lifting. Worksop, around 5 miles out, is treated the same way.

Fit-only or supply and fit

Which works out better, buying your own or letting us supply? It depends on what you value. Buying your own gives you control of the product and what you pay for it. Letting us supply puts the whole job, unit and fitting, under one written quote. On a customer-supplied unit we still measure it against the opening, look at the upstand, and inspect the condition it arrived in. Warranty on the product sits with whoever sold it, while the fitting carries our own guarantee.

Included in the work

• Opening marked out, covering stripped back and the deck cut cleanly
• Insulated upstand built square, level and to the maker's height
• Roof membrane, felt or tiles made good and dressed up the upstand
• Which way the joists run — We check the direction and size of the joists before fixing the rooflight's position.
• Warm or cold roof build-up — We find out whether the roof is insulated above or between the joists before designing the upstand.

How a fitting day runs

Fitting days start with a look at the sky. If rain is due, the order of work changes so the roof is never left open to it. A typical day for a new rooflight runs like this: set up access, protect the room, open up the roof or prepare the existing kerb or frame, check sizes, fix, seal, then finish inside. On jobs that take more than a day, the opening is weather-sealed overnight. The last hour goes on tidying, waste removal and a walk-round with you.

Do you need permission in Dinnington?

Replacing a rooflight in an English home is a controlled fitting: it has to be self-certified by a scheme-registered installer or notified to building control. We are not registered with a competent person scheme, so replacements we fit are notified with a building notice, and the new unit has to meet current energy limits. Adding a new one usually means a building regulations application, because joists or rafters are trimmed. On the planning side, most house rooflights are permitted development if they project 0.15 m or less; on a side slope the glass must be obscured and fixed unless the opening part is over 1.7 m above the floor.

Getting a price from photos

What we cannot see, we have to guess, and guesses make quotes wider. So the more you send, the tighter the price. Useful: shots from the roof or garden, shots from the room underneath, a rough width and length, the roof finish, any access problems, and the product page if you have already ordered. Add the property postcode around S25 and we will come back with a quote or a survey date.

Common questions in Dinnington

Ask for a quote for your Dinnington roof. Survey dates are offered based on fitter availability once you are happy with the price.