New rooflight in an existing roof in Chester-le-Street

Chester-le-Street guide prices

Guide ranges for supply & fit, including structure and making good; building control or warrant fees extra. Your price is fixed in a written quote after we have seen photos or surveyed. Scaffold, access towers or a crane are priced separately if the job needs them, and building control fees, where a job needs them, are shown as their own line.

Coverage in and around Chester-le-Street

Covering Chester-le-Street means covering the people who live and work there, not a single postcode. We take on domestic and commercial jobs in DH2, DH3 and DH9, and are happy to quote further out in Washington and Houghton-Le-Spring. If your address sits between towns, tell us and we will confirm whether it falls in our normal area or needs travel set out separately on the quote.

Buying your own, or letting us supply

Your unit or ours, the fitting standard is the same. For supply and fit we choose a new rooflight to suit the roof and price it with the installation. For fit-only we work with what you have, after confirming it arrived undamaged, that it matches the builder's opening, and that the upstand will sit at the height the maker asks for. Report any transit damage to the seller, as the product cover is theirs and the maker's. Our written guarantee applies to the fitting itself.

On the day, we cover

• Opening marked out, covering stripped back and the deck cut cleanly
• Roof membrane, felt or tiles made good and dressed up the upstand
• Joists or rafters trimmed with new timbers to carry the load around
• Upstand energy performance — We build the upstand to meet the energy limit for site-built upstands, not just to hold the rooflight up.
• Cables, pipes and ceiling fittings — We look into the ceiling void for anything in the way of the new opening.

From arrival to clean-up

Protection comes before tools. Floors, furniture and stairs get covered, and the ceiling below the opening is sheeted to catch dust. Up top, the fitters confirm the opening is square and the upstand or flashing suits what the maker specifies. Fixing follows, then weather-sealing into the membrane, felt or tiles. Only once the roof is tight do they turn to the internal reveal. Time on site for a new rooflight: two to three days, weather permitting.

Regulations for Chester-le-Street properties

Replacing a rooflight in an English home is a controlled fitting: it has to be self-certified by a scheme-registered installer or notified to building control. We are not registered with a competent person scheme, so replacements we fit are notified with a building notice, and the new unit has to meet current energy limits. Adding a new one usually means a building regulations application, because joists or rafters are trimmed. On the planning side, most house rooflights are permitted development if they project 0.15 m or less; on a side slope the glass must be obscured and fixed unless the opening part is over 1.7 m above the floor.

Before you get in touch

Each detail you send takes a question off our list. Photos inside and out show the opening and the ceiling. Rough measurements tell us the unit size. The roof covering tells us how it will be sealed in. Access notes tell us whether a tower or scaffold is needed. A product link, if you have one, lets us check it against the opening. Your postcode, DH2 or nearby, confirms travel.

Common questions in Chester-le-Street

Planning a new rooflight in Chester-le-Street? Tell us about the roof and we will come back with a clear price in writing.