Electric opening rooflight installation in Stoke-on-Trent

What the job costs in Stoke-on-Trent

Guide ranges for supply & fit; the electrician's final connection is quoted separately. Your price is fixed in a written quote after we have seen photos or surveyed. Scaffold, access towers or a crane are priced separately if the job needs them, and building control fees, where a job needs them, are shown as their own line.

Covering ST4 and neighbouring districts

Jobs across ST4, ST1 and ST5 are part of our normal cover for Stoke-on-Trent. We are not an office on the high street. Our fitting teams come out to the property from wherever they are working that week. Neighbouring places such as Newcastle-under-Lyme and Longton are covered on the same terms, so a house on the edge of town is no harder to book than one in the centre.

Already bought your unit?

A damaged delivery is a frequent snag on fit-only work. Before the day, unpack an electric opening rooflight, photograph it, and tell the seller about any cracks or scuffs, because claims are much easier made early. We will also ask for the model or a link, so we can read the maker's instructions and check the builder's opening size and the upstand height it expects. If everything lines up, we fit it. If not, we explain what needs changing first.

Included in the work

• Cable route planned through the kerb or reveal before the lining goes on
• Rain sensor positioned where it will get wet when rain starts
• Unit fitted, sealed and weathered like a fixed flat rooflight
• Opening onto a side slope — We check where the opening part will sit if the roof is pitched or the unit faces a neighbour.
• Rain sensor position — We place the rain sensor where rain will reach it quickly and debris will not cover it.

From arrival to clean-up

Where a job takes one day, plus the electrician's connection, the split is usually structural work first and finishing second. Early on, the fitters cut or prepare the opening, trim where needed and prepare the upstand or flashing. Then an electric opening rooflight is lifted in, fixed and made weathertight so the roof is sound before anyone moves inside. Plasterboard, trim and filler for the reveal come after. Each evening the work area is swept, and at the end the glass is cleaned and the team talks you through what was done.

Regulations for Stoke-on-Trent properties

In England, a new rooflight opening generally needs building regulations approval because the roof structure is altered and the glazing must meet energy rules: 2.2 W/m²K for a rooflight in an existing home, or 1.4 W/m²K (or WER Band B) for a roof window. Planning is often not needed on a house: permitted development covers rooflights that stand no more than 0.15 m proud of the roof slope and sit below the highest part of the roof. Flats, listed buildings and areas with an Article 4 direction are different, so we check your address first.

Before you get in touch

For fit-only work, the product details matter most: the link, the spec sheet, or a photo of the label on the box. Alongside that, send pictures of the roof and the ceiling below, approximate opening sizes, the type of roof covering, and how someone would get onto the roof. For supply and fit, the same photos and sizes do the job. Finish with your postcode, such as ST4.

Common questions in Stoke-on-Trent

Tell us your postcode, ST4 or close by, and what you want fitted. We will reply with the next steps and a quote.