Electric opening rooflight installation in Boston

Boston guide prices

Guide ranges for supply & fit; the electrician's final connection is quoted separately. Your price is fixed in a written quote after we have seen photos or surveyed. Scaffold, access towers or a crane are priced separately if the job needs them, and building control fees, where a job needs them, are shown as their own line.

Fitting across Boston and nearby

Jobs across PE21, PE20 and PE22 are part of our normal cover for Boston. We are not an office on the high street. Our fitting teams come out to the property from wherever they are working that week. Neighbouring places such as Spalding and Sleaford are covered on the same terms, so a house on the edge of town is no harder to book than one in the centre.

What we check on a supplied unit

There are two ways to do this. Supply and fit means we source an electric opening rooflight that suits your roof and install it, so one company answers for both the product choice and the fitting. Fit-only means you buy the unit and we install it. With fit-only, the product warranty stays with the maker or seller, and our written guarantee covers the fitting work. Both routes get the same checks on the opening, the upstand and the maker's instructions before anything is fixed.

What we do on the day

• Cable route planned through the kerb or reveal before the lining goes on
• Upstand checked or built to suit the unit and its actuator housing
• Cable route and controls set up ready for the electrician's final connection, quoted as a separate line
• Cable length and size — We check the cable run against the maker's limits before planning where the controls go.
• Opening onto a side slope — We check where the opening part will sit if the roof is pitched or the unit faces a neighbour.

From arrival to clean-up

Fitting days start with a look at the sky. If rain is due, the order of work changes so the roof is never left open to it. A typical day for an electric opening rooflight runs like this: set up access, protect the room, open up the roof or prepare the existing kerb or frame, check sizes, fix, seal, then finish inside. On jobs that take more than a day, the opening is weather-sealed overnight. The last hour goes on tidying, waste removal and a walk-round with you.

Planning, building control and Boston

Replacing a rooflight in an English home is a controlled fitting: it has to be self-certified by a scheme-registered installer or notified to building control. We are not registered with a competent person scheme, so replacements we fit are notified with a building notice, and the new unit has to meet current energy limits. Adding a new one usually means a building regulations application, because joists or rafters are trimmed. On the planning side, most house rooflights are permitted development if they project 0.15 m or less; on a side slope the glass must be obscured and fixed unless the opening part is over 1.7 m above the floor.

What to send for a quick quote

Keep it simple. Two or three photos, outside and inside. Approximate sizes. What the roof is made of. Anything awkward about getting up there, such as a conservatory below, a narrow side path or no parking. If you bought the rooflight online, the link or model name. Then your postcode in or around PE21. That is enough for a first price.

Common questions in Boston

Get in touch with the details of your Boston property and we will explain what the job involves and what it costs.