Dome rooflight replacement in Swanscombe

What the job costs in Swanscombe

Guide ranges for supply & fit, per dome; building control notice fee extra on homes in England and Wales. Your price is fixed in a written quote after we have seen photos or surveyed. Scaffold, access towers or a crane are priced separately if the job needs them, and building control fees, where a job needs them, are shown as their own line.

Coverage in and around Swanscombe

Jobs across DA10, DA9 and DA11 are part of our normal cover for Swanscombe. We are not an office on the high street. Our fitting teams come out to the property from wherever they are working that week. Neighbouring places such as Grays and Gravesend are covered on the same terms, so a house on the edge of town is no harder to book than one in the centre.

What we check on a supplied unit

Your unit or ours, the fitting standard is the same. For supply and fit we choose a dome rooflight to suit the roof and price it with the installation. For fit-only we work with what you have, after confirming it arrived undamaged, that it matches the builder's opening, and that the upstand will sit at the height the maker asks for. Report any transit damage to the seller, as the product cover is theirs and the maker's. Our written guarantee applies to the fitting itself.

What the job includes

• New multi-skin dome or glass unit fixed and sealed
• Adaptor or packing fitted where the old kerb needs it
• Inside checked for drips and the trim refitted
• Multi-skin domes and energy — We fit multi-skin domes rather than single-skin ones as replacements.
• Is the kerb sound? — We check each kerb for rot and movement before quoting a dome swap.

How a fitting day runs

Arrive and agree the plan. Sheet the floor and furniture. Set up the ladder, tower or scaffold. Check the opening, the upstand or flashing, and the unit against the paperwork. Fix and pack a dome rooflight level. Seal it into the roof. Line the reveal or fit the ceiling trim. Clean the glass, clear the waste, and talk you through it. That is the shape of most fitting days, and for this type of job it usually takes a few hours per dome.

Do you need permission in Swanscombe?

In England, a new rooflight opening generally needs building regulations approval because the roof structure is altered and the glazing must meet energy rules: 2.2 W/m²K for a rooflight in an existing home, or 1.4 W/m²K (or WER Band B) for a roof window. Planning is often not needed on a house: permitted development covers rooflights that stand no more than 0.15 m proud of the roof slope and sit below the highest part of the roof. Flats, listed buildings and areas with an Article 4 direction are different, so we check your address first.

Help us quote accurately

Start with your phone. Take a picture of the roof where the unit goes or already sits, then one from inside looking up. Measure what you can, even roughly. Tell us what the roof is covered with and how a fitter would reach it: ladder, garden access or scaffold. Bought it already? Send the link or spec. Add your full postcode, for example in DA10, and we can price it.

Common questions in Swanscombe

Ask for a quote for your Swanscombe roof. Survey dates are offered based on fitter availability once you are happy with the price.