Fit-onlySupply & fitReplacementsTrade fitting
Fitting teams across England, Wales, Scotland & NI · Call 0800 088 6248
RooflightInstallers.co.uk
Ponders End · EN3 · Greater London

Dome rooflight replacement in Ponders End

If the dome rooflight on your roof now is misted, discoloured, cracked or letting water in, replacing it is often simpler than people expect. The old unit comes out, we inspect the kerb or frame underneath, and we decide with you whether it can be reused or needs rebuilding. Then the new one goes in, sealed to the roof covering and finished inside. We handle this kind of dome rooflight replacement in Ponders End and nearby, alongside new openings and fit-only work. Postcode EN3 and its neighbours are all within our cover.

Guide price from £395 · Supply & fit, per dome; building control notice fee extra on homes in England and Wales

Guide prices

Like-for-like dome

£395 – £695including VAT at 20%

Old dome taken off, new multi-skin dome fixed to the sound existing kerb

Dome with kerb adaptor

£695 – £1,195including VAT at 20%

New dome where the kerb needs an adaptor or packing

Upgrade to glass

£1,095 – £1,695including VAT at 20%

Dome swapped for a double-glazed glass rooflight on the existing sound kerb, as in our replacement service

Guide ranges for supply & fit, per dome; building control notice fee extra on homes in England and Wales. Your price is fixed in a written quote after we have seen photos or surveyed. Scaffold, access towers or a crane are priced separately if the job needs them, and building control fees, where a job needs them, are shown as their own line.

Fitting across Ponders End and nearby

Ponders End and the districts around it, EN3, EN1 and N9, all sit inside our working area. So does the ground between Ponders End and Edmonton (1 mile), and on towards Enfield (2 miles). When a fitting team is booked, their travel is already in the quoted price, so it does not turn up as a surprise line on the final bill.

Buying your own, or letting us supply

There are two ways to do this. Supply and fit means we source a dome rooflight that suits your roof and install it, so one company answers for both the product choice and the fitting. Fit-only means you buy the unit and we install it. With fit-only, the product warranty stays with the maker or seller, and our written guarantee covers the fitting work. Both routes get the same checks on the opening, the upstand and the maker's instructions before anything is fixed.

On the day, we cover

  • New multi-skin dome or glass unit fixed and sealed
  • Old dome unscrewed, lifted off and taken away
  • Kerb top cleaned of old sealant, fixings and loose felt
  • Upgrading to glass — We check whether the kerb suits a glass unit before recommending one.
  • Fragile dome safety — We treat old domes as fragile at all times.

From arrival to clean-up

Protection comes before tools. Floors, furniture and stairs get covered, and the ceiling below the opening is sheeted to catch dust. Up top, the fitters confirm the opening is square and the upstand or flashing suits what the maker specifies. Fixing follows, then weather-sealing into the membrane, felt or tiles. Only once the roof is tight do they turn to the internal reveal. Time on site for a dome rooflight: a few hours per dome, weather permitting.

Regulations for Ponders End properties

England's rules in short: permitted development usually covers a rooflight on a house roof provided it doesn't stick out more than 0.15 m or rise above the ridge, though a listed building always needs consent and some streets have Article 4 directions. Building regulations apply to new openings, and replacements go through building control; as we are not registered with a competent person scheme, we use a building notice and show the fee on the quote. The energy limit for rooflights in existing homes is 2.2 W/m²K, and the 2026 Approved Document L, in force from 24 March 2027, keeps that figure.

Getting a price from photos

Start with your phone. Take a picture of the roof where the unit goes or already sits, then one from inside looking up. Measure what you can, even roughly. Tell us what the roof is covered with and how a fitter would reach it: ladder, garden access or scaffold. Bought it already? Send the link or spec. Add your full postcode, for example in EN3, and we can price it.

Common questions in Ponders End

Can you fit the dome rooflight I bought online?

Yes, fit-only is one of our core services. Send the product link or spec, photos of the roof and rough sizes, and we can usually price it from those. Before fitting we check the delivery for damage, which should be reported to the seller, plus the size against the builder's opening and the upstand height. The product warranty stays with the maker or seller, and our guarantee covers the fitting.

What is included in the price?

The written quote lists it line by line. Typically that covers fitting labour, fixings, sealants, membrane or flashing materials, any upstand work, internal finishing if agreed, and taking away the waste. For supply and fit, the unit itself is included too. Scaffold, lifting gear and any third-party fees, where needed, are shown separately so you can see what each part of the job costs.

Can you fit a rooflight in winter or when it is raining?

Yes, within limits. Cold is less of a problem than wet, because membranes, primers and sealants need a dry surface to bond. We plan fitting days around the forecast and may move a date if heavy rain is due. If the roof has to be opened up, it is not left overnight without a temporary weather seal, so the room below stays dry while the work is finished.

Questions before you commit? Send them over with your Ponders End postcode and we will answer them plainly, with a quote alongside.

Rear extension at dusk with lit rooflights and a roof lantern
Ready when you are

Dome replacement in Ponders End

Send photos and rough sizes, or ask for a survey for install work. One fixed written price before anything starts.

CallGet a quote